Sensor Electronic Technology, Inc. reaches milestone UVC LED efficiencies of over 10%, bringing consumer disinfection markets within reach

Date Announced: 23 Apr 2012

Columbia, SC – Sensor Electronic Technology, Inc (SETi) announced record
efficiencies of ultraviolet light emitting diodes (UV LEDs) operating in the germicidal UV-C range of 11% external quantum efficiency (EQE) with a corresponding wall-plug efficiency (WPE) of 8%. This industry beating result was achieved under the DARPA Compact Mid-Ultraviolet
Technology (CMUVT) program and in collaboration with Army Research Laboratories (ARL).

This latest development from the world’s leading supplier of UV LEDs represents more than a 5X improvement in performance: primarily attributed to improved light extraction from encapsulated LED chips with a novel transparent p-region and a reflective contact and further reductions in defect density in the LED structure, grown on sapphire substrates. Traditionally, UV LEDs have been manufactured with GaN p-layers, due to the difficulties of p-doping AlGaN materials. However, GaN absorbs wavelengths shorter than 365nm, and therefore reduces the extraction efficiency of UV LEDs operating at short wavelengths. SETi have developed a completely new ptype region using doped AlGaN, which is transparent, even in the UVC range. This coupled with a transparent p-contact significantly increases extraction efficiencies.

SETi has also further developed its MEMOCVD® growth process to reduce dislocation densities in the quantum well structure of UV LEDs grown on sapphire substrates and has demonstrated threading dislocation densities (TDD) of less than 2x108 (measured by TEM). This improvement in TDD leads to a high internal quantum efficiency (IQE) of 60%.

The 350um x 350um encapsulated LEDs were designed for emission at 278nm and measured at Army Research Laboratory where they were reported to emit 9.8mW at 20mA (the highest value ever reported for an LED shorter than 365nm at this forward current) and 30mW at 100mA. Details will be presented at CLEO 2012 meeting, San Jose, CA.

SETi has previously reported highly effective LED based water treatment systems that disinfect with >4 log reduction drinking water flowing at 0.5 liters per minute with less than 35mW of optical power at 275nm. The results from this development put UV LED disinfection systems within the reach of consumer markets for applications such as point of use water purification.

Contact
Phone +1 (803) 647-9757 Fax +1 (803) 647-9770

E-mail:

Web Site:www.s-et.com

More in Company Newsfeed