GlacialTech square heat sink uses cold forging technology rated for 30W LED thermal management

Dec. 16, 2015
GlacialTech Announces Igloo FS125S 30W Cold Forged Pin Fin Heatsink and Knock Down Kit

Semi-Knock Down Kit Makes it Easy to Create IP66 Rugged, High-performing Spotlights, Flood lights or Track Lights

GlacialTech, the diversified LED technology provider, announces a new square heatsink using cold forging technology rated for 30W LED thermal management. The Igloo FS125S measures 125mm square and 25mm in depth, is made out of anodized AL1070 aluminum and uses a pin fin design for optimal heat dissipation. Besides the Igloo FS125S itself, GlacialTech is also launching an LED luminaire semi-knock down kit which lets lighting manufacturers and integrators easily create rugged IP66 rated lighting products using the CoB LED of their choice.

Cold Forged Pin Fin Heatsink Design for LED Thermal Management
Produced with cold forging technology, the Igloo FS125S uses a pin fin heatsink design for maximum surface area and optimal LED thermal management in a given volume. With highly conductive AL1070 aluminum, the Igloo FS125S’s exterior fins direct fresh air into the inner round pins which generate turbulence, increasing thermal conductivity of the heatsink. An anodized surface treatment gives the aluminum Igloo FS125S superior corrosion resistance, scratch resistance, and heat tolerance.

Knock Down Kit Simplifies LED Luminaire Design
The Igloo FS125S features a semi-knock down (SKD) including an IP66 rated LED driver for either AC or DC current, an outdoor-ready LED housing with stainless steel mounting bracket, and a LED lens. Rather than having to find an appropriate driver, housing and heatsink combination, the Igloo FS125S heatsink with SKD kit provides everything a lighting designer or manufacturer needs to create a complete lighting fixture around their chosen CoB LED.

SKD Customization Flexibility
The Igloo FS125S SKD kit provides an easy to assemble LED lighting solution but the flexibility to customize lighting output and quality based on the end user application. The LED driver can be chosen to support 15W AC or DC current, or 35W AC current for a range of power sources and LED outputs. The base plate of the LED can be ordered with customized mounting holes to accommodate secondary optics to match the desired customer use case - flood light, spot light, track lighting, or more.

125x125x25mm cold forged pin fin heatsink
Anodized AL1070 aluminum
Suitable for CoB LEDs up to 30W
SKD Kit available for easy LED fixture assembly
15W AC/DC and 35W AC drivers
Stainless steel mounting bracket

GlacialTech's Thermal Solutions
GlacialTech's thermal management solutions are designed with a focus on cost-effective performance, as well as weight and volume reduction. GlacialTech’s LED lighting applications are designed to offer lightweight, space-efficient cooling at a great value.

For more information about GlacialTech thermal technology, please visit at

About GlacialTech
GlacialTech Inc. is a diversified provider of thermal, power, optics and systems solutions, with many years of experience in thermal module design and manufacturing for internationally renowned brands including Acer, AdvanTech, Fujitsu Siemens Computers GmbH, Panasonic and Siemens AG. GlacialTech's product solutions attain an optimal balance of performance and value.


Tatiana Trosheva - for GlacialTech