Infineon lighting interface IC reduces component count and board space up to 70% in LED lighting
The CDM10V can be used across a variety of different commercial and industrial LED lighting applications. This is enabled by one-time configuration of key parameters such as minimum duty cycle (1 to 10 percent), PWM output frequency (200 Hz to 2 kHz), dimmer/resistor bias current (50 ?A to 500 ?A) and ‘dim-to-off’ functionality. Furthermore, with ‘dim-to-off’ enabled the IC also provides the option of accepting PWM input signals.
Supplied in an ultra-miniature 6-pin SOT package, the CDM10V is ideally suited for use on small PCBs with high component densities. A supply voltage of 11 V to 25 V ensures compatibility with all common LED lighting applications including luminaires, troffers, downlights, sconces, office lighting and signage. The CDM10V joins a comprehensive portfolio of Infineon devices – including driver ICs and MOSFETs designed to simplify and speed the design of LED lighting applications.
Volume production of the Infineon CDM10V starts in April 2016 and engineering samples, a demo board and a configuration board are all available now. Infineon will show the integrated LED lighting interface IC in its booth #6136 at the LIGHTFAIR, April 26-28, 2016 in San Diego, California.
Contact:Fabian Schiffer - Infineon Technologies AG
+49 89 234 25869
Submit new products, case studies/projects, and other press releases at http://www.ledsmagazine.com/content/leds/en/addcontent.html.
More from Infineon:
Infineon's latest LED controller improves performance, reduces power consumption in mid- to high-end LED lighting designs
Infineon will show LED driver ICs and microcontrollers at Light+Building 2016