GLT offers LED-based light guides for wearables applications

May 30, 2016
Brecksville, OH -- Wearable technology includes devices such as glasses, headwear, shoes, wrist-worn devices and any other electronic enabled device that can be worn. The wearables market is expected to grow to over $70 billion by 2025, with large segments in healthcare, fitness, fashion, industrial, commercial and military applications. As this market continues to develop and expand at a rapid pace, illumination needs within the industry are also increasing. This illumination includes both functional, such as backlighting and frontlighting of displays and indicators, and decorative, such as lines of light or illumination of logos.

Wearables are extremely driven toward smaller and lighter weight products that are less imposing and distracting to the user. As much of the weight within these products is based on batteries and electronics, any savings in power or total package size from the illumination component results in lighter weight and smaller size devices. This is where Global Lighting Technologies’ thinner and more efficient lightguide technology is helping the industry.

With wrist-worn devices, Global Lighting Technologies (GLT) has lightguides in production as thin as 0.25 mm and using as few as one LED to illuminate LCDs in conventional, GPS, and fitness watches. This not only allows for a thinner profile on the user’s wrist, but also enables a decrease in power consumption, resulting in increased battery life and enhanced performance. With proper design and LED coupling, the efficiency and uniformity of these backlights can outperform much thicker lightguides.

In the clothing side of the wearables market, GLT has product in the 0.25 mm to 0.40 mm thickness range made of polycarbonate (PC) material that can be flexible. These lightguides can be combined with single color LEDs as well as RGB (red, green, blue) LEDs to produce backlights for logos and decorative elements. Since very thin PC material can be flexed, it is perfect for applications where it must be manipulated to create items such as purses, hats and clothing.

Within the head-worn market are Augmented Reality (AR) and Virtual Reality (VR) devices. GLT has created customized lightguides with focused and directed light emissions patterns necessary for the proper illumination of displays. This assists with the performance by directing the projection of images from the LCD to the eye creating the final user experience.

GLT manufactures these products within their five company-owned, state-of-the-art manufacturing facilities in the Far East allowing for high volume production at competitive costs.

Contact Global Lighting Technologies (GLT), Inc., 55 Andrews Circle, Brecksville, OH 44141. Tel: 440-922-4584; Fax: 440-922-4585.

GLT has lightguides in production as thin as 0.25 mm and using as few as one LED to illuminate LCDs on GPS and fitness watches and other products. Photo: GLT

About Global Lighting Technologies:
Global Lighting Technologies (GLT), Inc. was founded in 2000 to develop LED-based edge lighting technology for the latest generation of flat panel displays. Today, GLT is developing new lighting concepts for solid state lighting in general illumination applications utilizing its LED-based light guide technology. GLT's edge lighting technology focuses the light of LEDs placed along one or more edges of a thin light guide in order to deliver the light precisely where needed, providing bright, uniform light in a thinner form factor with more efficient light extraction and fewer LEDs. With five manufacturing facilities in the Far East, GLT is poised to deliver a better light guide at lower cost with faster turnaround.


Global Lighting Technologies (GLT), Inc.