Date Announced: 21 Oct 2010 Recently, LEDKE launched the DMX controllable LED wall washer. The lamp body is made of aluminum alloy by molding process, and the surface are anodized to increase corrosion resistance, finally ensure a good cooling system for the wall washer, and result low light decay for the LEDs. On the top, the wall washer is sealed by tempered glass and silicon rubber, internal is sealed by epoxy to ensure good waterproof effect. The LED wall washer is using 18 pcs high-power LEDs (US Bridgelux chip, other chips are available), and PMMA planar optical lens, low light loss and good illumination, 15, 30, 45, 60 degree light angle are optional. With built-in constant current power supply, ensure the lighting performance and stability. For the RGB color lamp, the DMX receiver are also built-in, so that you can controlled by the DMX freely.Features:1) Material: Watrproof aluminum alloy, 3MM euphotic toughened glass.2) DMX LED wall washer with input Voltage: AC100V~240V.3) Constant Current: R/G/B 320mA.4) Light source: 18pcs 1W or 3W high brightness LED(6pcs R, 6pcs G, 6pcs B).5) Length: 600*76*75mm.6) Projection Distance:32pcs need an amplifier, the length is unlimited in theory.7) IP grade: IP65.8) Single color and RGB full color available.9) Viewing angle: 15, 30, 45, 60 degrees.10) Life span: >50,000 hours.11) Control mode: DMX512 controller available.12) Single color wall washer are dimmable, RGB colors wall washer can change 7 different dynamic modes under remote.13) Accessories: the DMX controller and adapter are inside.Application:1) DMX LED wall washer can be architectural decorative lighting.2) Archway, canopy and bridge edge lighting.3) Atmospheric interior lighting.4) Flood lighting for road, building or bridge.5) Light output for disco decoration, stage, club, bar hotel, garden, Museums, art galleries, plaza etc.
Contact
LEDKE Technology Co., Ltd Tel: 86-0755-27319793 Fax: 86-0755-82949887
E-mail:[email protected]
Web Site:www.ledke.com
