eldoLED launches ECOdrive, POWERdrive and LINEARdrive at Lightfair
At LIGHTFAIR INTERNATIONAL 2009, eldoLED will launch the ECOdrive, POWERdrive and LINEARdrive Series: highly integrated and enclosed constant current and direct voltage controlled LED driver/controllers featuring an intuitive user interface and a wide input voltage range for networked (DMX/DALI/0-10V) or standalone indoor LED lighting applications:
• ECOdrive is a cost-effective 4-channel constant current DMX/0-10V LED driver/controller with a single LED current source. The single current source with 4 independently controlled channels gives ECOdrive an efficiency of up to 95%. With a 12V-32V DC supply voltage range, ECOdrive drives high-brightness LEDs requiring up to 1.4A and gives up to 45 watts of power. Available in 15, 30 and 45 watt version.
• POWERdrive is a multiple LED current source solution for DMX, DALI and 0-10V networks offering a power output of up to 180 watts. POWERdrive has a wide supply voltage range of 12V-32V DC. The LED current can be set for each channel individually, giving you enormous flexibility in driving your LEDs. Available in 45, 90 and 180 watt version.
• LINEARdrive is the ideal solution for direct voltage controlled LED applications. With a 12V-28V DC supply voltage range, LINEARdrive drives low-power LEDs in applications requiring up to 24A. This driver/controller is broadly applicable in standalone, 0-10V controlled or DMX/DALI networked LED systems. Available in 6A and 24A version.
Suitable for practically all LED types and configurations
The LED current of the ECOdrive and POWERdrive can be set to any value between 200mA and 1.4A in 50mA steps, making them a perfect match for practically all LED types and configurations.
Setup is a breeze!
Configure the ECOdrive, POWERdrive or LINEARdrive over their intuitive, 3-button user interface with display. The easy-to-navigate menu allows you to set parameters such as number of channels, DMX or DALI settings for networked mode and show/colour/dim values for standalone operation. You can also lock the driver's configuration and perform a test run of the connected LED groups.
ECOdrive, POWERdrive and LINEARdrive are DMX and LedSync-compatible, allowing 15-bit dimming and colour control and bidirectional communication for driver configuration and temperature read-out. All three ranges have a low EMI and robust thermal management, and are easy to connect.
ShowMaster, supported on all eldoLED driver/controllers, allows you to upload show sequences for use in standalone mode. You can create and manage your own show sequences with the TOOLbox and freely available PC software.
The ECOdrive, POWERdrive and LINEARdrive will be officially launched at LIGHTFAIR INTERNATIONAL 2009 in New York and immediately available thereafter.
For further information, please contact the eldoLED sales department at sales@eldoLED.com or +1 408 451 9333 (North America) or +31 40 2054050 (other countries). For information regarding customized solutions, please contact the eldoLED OEM department at OEMdesk@eldoLED.com or +1 408 451 9333 (North America) or +31 40 2054050 (other countries).