eldoLED's upgraded LINEARdrive LED driver gives design freedom
eldoLED’s LINEARdrive 720D – the number one choice for full-colour LED applications in architectural, façade, entertainment and stage lighting – has been upgraded to support 5V, 12V, 24V and 48V LED strips.
The LED strips can even operate concurrently, giving designers increased freedom and future proofing for the installation. The LINEARdrive, which dims down to as low as 0.1%, can be used with all leading protocols (DALI, DMX, DMX/RDM, 0-10V). A wealth of configurations settings is set over the intuitive user interface.
Thanks to the driver’s Remote Device Management support, you can easily track down and address your luminaires from an RDM capable DMX controller. No need to open luminaires to re-address the driver during installation or re-commissioning.
Excellent dynamic effects
When using the LINEARdrive in a DMX network, you can easily configure it to get the light output response that fits the dynamic effects of your application, even if you have to work with a DMX controller whose signal quality is not the world’s greatest. No matter which type of application you have, be it ‘video snappy’ or ‘lava lamp smooth’, the LINEARdrive will deliver the effect you want.
To sum it all up, LINEARdrive 720D (LIN720D2)
• runs 5V, 12V, 24V ánd 48V LED strips, even concurrently
• offers RDM support (explore & address, E1.20)
• delivers great dimming and color fade smoothness in every situation
• supports choice of dimming curve to suit your control device
• can be completely configured via 3-button user interface
• allows upload of your show sequences for use in standalone mode through ShowMaster
More information on the LINEARdrive can be found on www.eldoled.com/lineardrive.
eldoLED Europe bv Phone 00 31 (0)40 2054050 E-mail: firstname.lastname@example.org eldoLED America Inc Phone 00 1 (408) 451-9333 E-mail: email@example.com