LUXdrive announce release of a011 flexblock LED driver

Aug. 9, 2011
Date Announced: 09 Aug 2011 LUXdrive is pleased to announce a further addition to its line of high power, constant-current drivers with the release of the A011 FlexBlock LED driver.The device, configurable in either boost only or buck-boost modes, is ideal for driving the new high-brightness, high-power LEDs and LED arrays. It is available in 350mA and 700mA versions and, with the same small footprint and extremely low profile (2.0" x 1.2" x 0.38") as the previously announced A009 BuckBlock. The A011 is the smallest high current boost driver available. The FlexBlock module operates from an input voltage of 10 to 32 VDC and provides a maximum output voltage of 48 VDC. In the buck-boost mode, the output voltage may be less than, equal to, or higher than the input voltage.In many applications, the driver can be operated with no additional heat sinking. An attachment point for a thermocouple or other temperature sensor is indicated for ease in determining the need, if any, for additional heat sinking. Fully protected against reverse polarity, output short circuit, and output open circuit, the A011 is also fully dimmable and is compatible with many commercially available 0 to 10 VDC low-voltage dimming controls.The A011 can be used in a wide variety of LED lighting applications that include architectural, solar, accent, track, automotive, marine, desk and reading, point of purchase, signal and marker, cabin and display, and more.Samples of the A011 FlexBlock are available either directly from LUXdrive or from our distributors. Please see our website for a data sheet and further information, including contact details.

Paul Fielder VP Sales LUXdrive LEDdynamics, Inc +1 802 728 4533 ph +1 802 728 3800 fax [email protected]

E-mail:[email protected]