Khatod North America LLC showcases high-tech optical systems for power LED and HB COB LED lighting at Strategies in Light, Booth # 947
Feb. 8, 2013
Date Announced: 08 Feb 2013 KHATOD is pleased to unveil its latest Optical Solutions for Solid State Lighting: entire ranges of cutting-edge optical systems, reflector systems, modular systems able to meet the most demanding requirements for Indoor, Outdoor and Street Lighting. NACTUS IP Optical System. Ready-to-use optical panel available in multi-lens arrays, from 12 to 24 – 36 – 48 optics, IP protected rating IP65. Equipped with a silicone gasket placed in the special groove all around the perimeter edge of the panel, ensures protection against powder and water penetration. NACTUS IP panels are totally clear fine-frosted finish. The side-pocket for the cables entrance is also a benchmark for the correct positioning of the panel during the mounting operation. Designed for Power LEDs from 100 l/W to 300l/W, the optics forming Nactus are the core of the product. By acting on them while each module is injected, it is virtually possible to customize any application. NACTUS IP is approved according to EN 62471:2010 Standard for photobiological safety of lamps and lamp systems. Patent Pending.LYRA Optical Reflectors. Specific for HB COB LEDs, the PCHT from which the reflectors are made, the aluminum coating in vacuum plant and the protective layer, allow to perform a working temperature up to 180° and a lighting efficiency over 85%. The assembly is by means of adaptors customized for the individual models of COB LEDs, allowing an immediate easy assembling of the reflector by a simple twist & lock system: first the adaptor is fixed onto the COB LED module while the reflector is then fixed by simply twisting and locking it onto the adaptor. No soldering, no gluing. Also, the adaptors allow for the interchangeability of the LYRA reflector models on the same LED source. Fit for any application in wide area lighting. They comply with Zhaga standards.PIXEL Reflector System. Ready-to-use multi-reflectors array, from 12 to 24 – 36 - 48 - 60 square-shaped reflectors; for any applications in Wide Area Lighting, Indoor, Outdoor; Architectural Lighting; Billbord Lighting. Made of PC for vacuum coating treatment; fit for High Brightness LEDs from 100 to 900 lumens and over; perform a square shaped beam. The positioning pegs allow for an easy fixing onto the PCB or, by removing them on one side, linear or extensive structures of various dimensions can be shaped.“KHATOD’s focus is to provide our customers with the latest in LED Lighting Technology. At SIL you will see the introduction of new developments to the industry as well as smart expansions to existing lines helpful to fit new applications and methods to facilitate lighting practice.”, said Giuseppe Vasta, President of Khatod Optoelectronic.“In this spirit, we have lined up new series of products and undertaken important investments. Just to name a few: starting from June 2012 we are accepting orders from our new location in Pembroke, MA. Khatod North America LLC has stock Stateside for all the ranges of Khatod products so to expedite your orders and satisfy your requirements in the best way. Also, Khatod HQ in Italy, has recently expanded its facility into a nearly double surface including the most advanced equipments for the optical technology.From Project to Object, this is our motto, and we are proud to accomplish this task basing on the most advanced technologies, totally in house, 100% exclusively made and certified in Italy.”About Khatod Optoelectronic:Khatod delivers the widest range of lenses and Optical Systems for HB and COB LEDs of latest generation for any applications in General and Wide Area Lighting, a proven capability to develop custom optics and a huge choice of optoelectronic components. Unique on the international scene, Khatod holds all of its operations in house, Milano, Italy: a full optical service encompassing optical and mechanical designs, mould fabrication, injection moulding, test and inspection. All of the manufacturing processes, from initial design to time to market are 100% carried out and certified in Italy. Follow us on Twitter @ http://twitter.com/#!/KHATODOPTO and Facebook @ http://www.facebook.com/pages/Khatod-Optoelectronic-srl/263694230338604View company video @ http://www.youtube.com/watch?v=G1Opls1D0NU
Contact
Khatod North America: Silvio Porciatti, North America Area Manager, T. 1-781.826.8164, F. 1-781.826.8163 Khatod Optoelectronic, HQ, Italy : T. 39-02.66013695, F. 39-02.66013500
E-mail:[email protected]; [email protected]
Web Site:www.khatod.com