Date Announced: 03 Sep 2013 We are the first company to use the liquid cooling patent technology. This is new technology for LED lighting, which is an important technology revolution.1. We use superior liquid cooling technology to make thermal management for LED chips, lower the LED bulb chips temperature, in order to protect the longevity of the bulbs to 60,000 hours. The liquid which we put inside bulbs, which our company heavily researched and developed, now fully meets the demand for lighting cooling. The liquid is safe, with no poison or smell, complies with European environment certification standards, and can have a very good flame-retardant explosion-proof effect to improve performanceof the whole lamp.2. Using the high transmittance liquid inside the lamp body enables the light to emanate from the three-dimensional, light-emitting core shell without any light loss from the chip, and get a hundred percent output. So our liquid cooled bulb provides spherical light output similar to the traditional incandescent light, and adds at least 30% luminous flux than traditional LED spherical bulbs.3. We use IC constant current technology; the drive light inside the bulb does not use traditional transformers and capacitors, thus ensuring the whole lamp life is not affected by the power life. Ensuring that the light is different than the ordinary LED bulb, the whole bulb life is limited by battery life. Without inductance components inside the circuit, it can frequently switch, flashes to use, and this does not damage the bulb. But the traditional lamp is not suited to frequent switching. Also our bulbs can be used for dimmer environments.Parameters of the new 360degree full angle 14W A19 cooling liquid led bulb:* Dimension(mm): 60(D) *111(H)* Working voltage: AC220V +/-10% or AC110C +/-10%* LED: 3014*97 pcs* CCT: 2700-6500K* Beam angle: 360°* CRI: Ra=90* E27 base* Non-dimmable* IP rate: IP65* PF: >0.93* Lumen: 1300 ±10% lm * Lifetime: >50,000hours
Contact
Ken Lee
E-mail:[email protected]
Web Site:www.follettled.com
