View This Issue - September 2012

The China LED wafer market: A story of commoditization (MAGAZINE)

+++++

This article was published in the September 2012 issue of LEDs Magazine.

View the Table of Contents and download the PDF file of the complete September 2012 issue, or view the E-zine version in your browser.

+++++

In 2010, the future of the Chinese LED market was looking brighter than ever. The world economy was recovering from the “Great Regression,” new environmental and efficiency initiatives outlined in the country’s twelfth five‐year plan would soon go into effect, and Chinese central and local governments were actively supporting the procurement of high‐tech production technology across all industrial segments. Seeing LEDs and solid-state lighting (SSL) as a growth sector, the government set out to control the entire value chain, but not all went as planned.

Fig. 1. The current typical path of an LED wafer in China (Source CGiS) China ideally would want to own the entire value chain, which would mean less dependence on foreign imports of high quality LED components and wafers. This has yet to be realized despite government support to leading companies such as San’an. Also, note that for many suppliers, these three or more steps have been completely vertically integrated. For instance, Samsung will manufacture the chips in Korea, encapsulate them in China, and then use them as backlighting for their phones or other products.
FIG. 1.
Back in 2010, Chinese policy makers believed that if they applied the same commoditization tactics on the high‐tech green LED wafer market as they had done with so many other industrial products (solar panels, motors), then Chinese LED companies could muscle foreign companies out of the value chain and supply China’s downstream industries themselves. Chinese leaders wanted their country to produce the semiconductor material, form the wafer, encapsulate the bulb, create the component, make the TV and sell it to customers abroad. They wanted to own the entire value chain, from raw material to smart phone, from wafer to automobile (see Fig. 1).

However, slow export sales from China, lack of technological know how, and over expansion would combine to keep significant market share in the hands of multinationals, streamline the value chain, and perhaps even hinder China’s future ability to innovate.

Route to commoditization

This story of commoditization started over two years ago. This was a time when the world was coming out of the trough created by the great recession. Chinese exports had dipped and international demand for TVs, appliances, and lighting was expected to rebound. A five‐year plan with major sections focused on incorporating green technology had just been published. There would be a government‐driven push for efficient products and subsidies for high‐tech industries. Finally, the existing production capabilities of Chinese LED wafer suppliers were meager. For LED suppliers in 2010, it was the time to act. And so they did.

Chinese authorities are not shy about rolling up their sleeves and tinkering with markets. To wrestle market share away from imports and multinationals, the Chinese planners applied the same economic strategy they had applied to other other high‐tech green products – volume. Increasing production volumes will push prices down and commoditize the product. With high enough output, product differentiation will shrink, and internationally recognized products will lose their advantage. Presumably American, German, Japanese and Taiwanese giants such as Cree, Osram, Nichia and Epistar simply would not be able to compete with the cheap domestic products. It worked for solar panels. Why not LEDs?

These policy makers started by promoting upstream industries, downstream industries and everything in between. Local governments supported regional LED suppliers by enacting policies that called for municipal lighting projects to only use LEDs made by a regional manufacturer. Some, such as those in Guangdong, went so far to demand that all public lighting use only LEDs in 3‐years time.

Fig. 2. The Future of China’s LED value chain (Source: GCiS). The future of the LED market in China will evolve to look something like the above. Manufacturers of LED wafers, chips, and devices will converge together as front-end suppliers. These products will be sold to LED light and module manufacturers. For higher-end applications such as telephones and cars, OEMs will remain the final step in selling product to consumers.
FIG. 2.
Besides directly funding LED projects, the government offered money back to customers who purchased efficient LED TVs and other efficient appliances, indirectly promoting downstream sales. But more than anything else, subsidies on expensive LED wafer production equipment, particularly the metalorganic chemical vapor deposition (MOCVD) system, made manufacturing LEDs more accessible than ever. Official government estimates also lured suppliers in expanding, by predicting that the total LED market would be worth RMB 400 billion (around $63 billion today) over four years, a massive sum.

This combination of expected growth in exports after 2010, optimism from the five‐year plan, and government backing in just about every form fueled capacity and begin the first stage of commoditization. Over the next two years, the number of MOCVD tool purchases increased dramatically. In 2010, there were about 220 MOCVDs owned across 16 Chinese companies. By the end of 2011, the same 16 companies had just short of 500 units.

Output up, prices down

With such a massive increase in production capacity, prices began to drop as supply outweighed demand. LED prices declined by 10‐15% every year since 2010, with some sectors, particularly blue and white low power LEDs, dropping more rapidly.

Domestic wafer suppliers now find that as the total production capabilities of competitors increased (and product differentiation decreased) pricing power of companies began to diminish. As market power decreases, so does the company’s mark‐up, and companies were finding their margins squeezed. One domestic supplier noted: “Companies which manufacture blue LEDs have basically been squeezed to the point where they do not make any profit…There is not a very positive outlook in the LED wafer market.”

Shandong Inspur Huangguang Optoelectronics, a large domestic manufacturer of LEDs, had 16 MOCVD tools in 2010. By the end of 2011, this company had procured another 16 MOCVD systems. In the 2011 business year, however, this company ran their factory at an average of about 44%. This means most of their production equipment had been sitting idle and not returning on the investment.

Margins and mergers

As prices and margins continue to decrease, smaller companies in the middle stages of the value chain will be forced to either leave the market or become acquired by larger companies. Concurrently, larger companies will look to expand their range of offerings. APT, a domestic company, has already moved toward this trend. In 2010, the company only offered LED chips, but has expanded production capabilities to include LED devices.

Cree, an American company, is stretched over many stages of the chain, occupying materials, chips, wafers, modules and component supplies. Other companies, such as Samsung, control the entire value chain, from chip production, to the OEM application.

Consolidation and mergers will be a slow but necessary process. Over the next five years or so, the market will become more streamlined and more concentrated. Instead of five different steps, it will be reduced to three: a front‐end, a back‐end and an application step (See Fig. 2).

The story of commoditization is commonplace in China, but it may not be the best way to control the entire value chain, as was its initial intention with SSL. Instead, international wafer and LED suppliers will remain key players, since they will still be the only other suppliers capable of manufacturing the high lumen, high quality, high‐intensity white LEDs which comprise over 70% of the total LED market by revenues (but only about 7% by sales volume). Commoditization does reduce prices but it can compromise a company's technological advancement.

From an investment standpoint, China has spent heavily in expanding its production capabilities. If these investments were to fail, then there would be little incentive to invest further and try to develop a better product, a product which is competitive with those produced by foreign companies. For this reason, commoditization will fail to put the upper end of the value chain into the hands of domestic Chinese companies. LEDs are showing to be resistant to China's commoditization economic model.

RELATED COMPANIES

Zierick Manufacturing Corp

Offers innovative solutions for interconnect applications. Specializes in wire-to-board and board-to-board applications. Provides surface mount and thru-hole products while further reduci...

Cree Inc

Leads the LED industry in performance, brightness and reliability with its XLamp LED family, enabling the lighting industry with efficient, environmentally-friendly LEDs that produce beau...

InnoLight sp zoo

EU located lighting manufacturer for LED GU10 5W 600lm CRI>80 reflector, great performance, and LED E27 5W 380lm classic traditional appearance.

CSA Group

A global solutions provider of product testing and certification services for electrical, mechanical, plumbing, gas, medical and a variety of other products.

Energy Efficient Lighting

Energy Efficient Lighting offers total solutions to both conventional and more advanced LED lighting fixtures and LED retrofit kits for commercial and industrial applications.

Schréder

48 companies worldwide, passionate about light and innovation, experts in developing LED lighting solutions for safe and comfortable environments with significant energy and cost savings,...

Guardian Industries

Guardian Industries Corp. is a leader in float glass, fabricated glass and high performance coated glass products. Guardian lighting solutions deliver optimal performance, flexibility and...

ELMA Electronic Inc

Provides standard and customized LED solutions. Elma's LED family offers consistent, reliable, and durable illuminating and indicating solutions.

LEDSAmerica Inc

LedsAmerica is a full line LED line company and has manufacturing in Iowa where T8 LED-O tubes and street lights are made together with PL, PARs, High Bay lights. MAx

Lumentra Inc

Provides NVLAP accredited optical (photometry, colorimetry, Lumen maintenance), thermal (mapping and transient analysis), electrical characterization services, product development, supply...

CINCON USA

The LED, DC-DC and AC-DC power supplies from 1W - 1600W. Cincon’s lighting controllers, interfaces and devices incorporating DALI protocol. LED drivers from 25W - 150W with international ...

LTF LLC

LTF, LLC is a U.S based solid-state lighting product development and manufacturing company with facilities located in both USA and China.

Marian Inc

Marian is a global company who supplies die cut and converted parts to the LED market. Materials include thermal pads, reflective, venting, gaskets, insulators, diffusers and more.

Colorimetry Research

Specializes in the field of optics, manufacturing, electronics and software enables us engineer products with the right balance of hardware and software.

eldoLED America Inc

Designs and manufactures drive solutions for LED based lighting systems. Our technologies empower our customers to deliver the promise of LED lighting.

Cirrus Logic Inc

Cirrus Logic develops high-precision, analog and mixed-signal integrated circuits for a broad range of innovative customers across a variety of energy-related applications, including the ...

LEDSupply

Established in 2002 as an ecommerce store for all your LED product needs.

CINCON

Designer and manufacturer of custom and industry standard LED, DC-DC and AC-DC power supplies from 1W to 1600W. Cincon also designs and manufacturers lighting controllers, interfaces...

Illumination Machines

Illumination Machines designs custom optics, heat sinks, and remote phosphor systems for LED luminaires and lamps.

eldoLED BV

eldoLED is a world leader in the design and manufacture of intelligent drive solutions for LED based lighting systems. Our technologies empower our customers to deliver the promise of LED...

RELATED PRODUCTS

Cree CXA LED Array Family

Cree’s CXA LED Arrays are optimized to simplify design and lower system cost, delivering high lumen output and efficacy with a family of single, easy-to-use arrays.

Cree LED Modules

Cree LED modules deliver beautiful, consistent light, backed by a 5-year warranty. They offer a choice of dimming options, while reducing the lighting power load by 80%.

Cree XLamp® XP-L LEDs-the industry’s highest efficacy single-die LED.

Cree® XP-L LED is the first commercially available single-die LED to achieve up to 200LPW at 350mA. The XP-L enables 50% or more performance increase as a drop-in upgrade.

Surface Mount Wire Gripper - Part Number 1301

The Zierick 1301 is designed to allow customers to easier terminate a stripped wire to a PCB. Wire sizes to 24 AWG. Terminal is UL Recognized.

Surface Mount Wire Gripper - Part Number 1262

The Zierick 1262 is designed to allow customers to easier terminate a stripped wire to a PCB. Wire sizes from 0.025" to 0.095". Terminal is UL Recognized.

Unlock new LED lighting solutions with Cree High Density LEDs

Cree® High Density LEDs deliver the industry’s highest optical control factor enabling lighting manufacturers to improve performance, cost and size of LED lighting—enabling never before p...

Cree XLamp® XM-L2 EasyWhite® LED

The first 5mmx5mm LED to enable color-consistent 50W halogen performance; the XM-L2 EasyWhite delivers 1,100 lumens and is optimized to replace halogen technology.

Surface Mount Insulation Piercing Terminals

Surface Mount Wire-to-Board terminals available for wire gauges ranging from 24 to 14 AWG. Parts can be terminated to allow daisy-chain applications. Eliminates difficulty with direct...

LED flexible strip and aluminum LED bar

Full range of LED strip and bar including the unique high lumen strip. Protection degree up to IP68.Epistar 3528/5050 SMD LED.Compliant with CE & RoHS.2-year warranty.3528: 60LED/m,120LED...

P3 Indoor Full Color LED Display Video screen

High-density pixel pitch,high resolution,high refresh rate,magnificent and high-definition image and video effect.P3,P5,P6,P7.62 to P10 available.Epistar SMD LED,wide viewing angle.High r...

LED Panel Light

Designed to replace T8 fluorescent tube or Phillip Grille light.Epistar 3528/3014 SMD LED.Aluminum alloy body.Even and Soft light beam.Various mounting means.50,000 hours lifetime.Environ...

Rotatable LED Down Light, beam angle adjustable 10-60°

Beam angle adjustable 10-60 degree.Shell can rotate 360°,vertical 0-40°.High power CREE LED,even and uniform light output,Die casting aluminum alloy housing,good heat sinking.Widely used ...

Solar LED Paver Light

100% solor powered.No wires, no electricians.Super capacitors instead of battery,maintenance-free.Absorb sunlight in daytime and illuminate 8-12 hours during night. Epistar LED.Activation...

T8 LED tube light

Epistar Super bright 3528/2835 SMD LED.Aluminum alloy body with plastic cover.Consist with traditional fluorescent tubes.Easy mounting.PF>0.90,CRI>72,Over 60% energy-saving,Low degradatio...

LED light Bulb – LED spotlight

The AR111,GU10,MR16,PAR30,PAR38 LED bulbs are ideal replacement of 10-75W halogen or CFL bulbs.Cree/Everlight LEDs.PMMA lens.Aluminum housing.Good heat dissipation.Surface temperature les...

Super bright Injection LED modules

Housed by ABS material,covered by epoxy resin on surface with good insulation.Beautiful appearance.Waterproof.Anti-fire.Super bright 5050/3528 LED.12V voltage.Ideal light source for backl...

Flexible LED screen - Rental and Stage LED billboard

Special design,flexible use,light weight,super slim,transparent,SMD technology,easy to install.Can realize any curved and creative installation horizontally and vertically.IP65 protection...

iVAR COB LED Downlight

iVAR COB LED Downlight use die-casting magnesium alloy to make the main body,has Excellent heat dissipation performance,and Unique and delicate looking design.

LIMS - Liquid Injection Molding System

Silicone LIMS can be used to injection mold silicone components such as lenses or gaskets in an automated process. The two-component, thermoset material ranges in Shore A hardness from 5-80.

360 degree 10W led bulb

360 degree 10W led bulb has high efficiency, high power factor,environmental friendly, unique heat-dissipating design and perfect thermal management.

TOPIC INDEX

CONNECT WITH US

                

SOCIAL ACTIVITY

UPCOMING EVENTS

  • List View

NEWSLETTERS

LEDs Magazine Newsletter

Our weekly flagship news source
SUBSCRIBE

Product Focus

Monthly newsletter
SUBSCRIBE

Illumination in Focus

Bi-monthly newsletter
SUBSCRIBE

  •  
  •  
  •  
Copyright © 2007-2014. PennWell Corporation, Tulsa, OK. All Rights Reserved.