Luxeon LEDs used in Audi R8 headlamps

Philips Lumileds has reported that its Luxeon Automotive LEDs are being implemented on the new Audi R8. The LEDs enable revolutionary design possibilities for forward lighting (high beam and low beam) and deliver life-of-vehicle performance.

Audi R8 Luxeon
Audi R8 Luxeon

From late 2007, the Audi R8 will be available with all-LED forward lighting LED headlights available on Audi R8 from late 2007 (October 2006)). The LED headlamp assemblies were developed by German manufacturer Automotive Lighting.

Research and technology advances at Philips Lumileds have resulted in LEDs that deliver the flux and luminance required to achieve a legal headlamp beam with a small number of LEDs, while also meeting stringent color and reliability requirements.

The four key technology areas addressed in the development of these automotive LEDs were:

  • Flux improvement through advances in the semiconductor epitaxial process.
  • Surface brightness (luminance) improvements by incorporating Thin Film Flip Chip (TFFC(R)) technology.
  • Phosphor capabilities that deliver colour control and stability over the life of the vehicle.
  • Packaging advancements that deliver the ruggedness required in harsh thermal environments.

Lumileds says that the linear array of chips inside each Luxeon Automotive LED is the result of years of technology development and research into the optimal dimension and packaging for each light source.

Using these LEDs, headlamp suppliers such as Automotive Lighting can engineer and create the optical systems that deliver the required amount of light, and at the same enable a unique appearance to enhance the design of the vehicle in both the lit and unlit state.


Guardian Industries

Guardian Industries Corp. is a leader in float glass, fabricated glass and high performance coated glass products. Guardian lighting solutions deliver optimal performance, flexibility and...


LTF, LLC is a U.S based solid-state lighting product development and manufacturing company with facilities located in both USA and China.

Illumination Machines

Illumination Machines designs custom optics, heat sinks, and remote phosphor systems for LED luminaires and lamps.


P3 Indoor Full Color LED Display Video screen

High-density pixel pitch,high resolution,high refresh rate,magnificent and high-definition image and video effect.P3,P5,P6,P7.62 to P10 available.Epistar SMD LED,wide viewing angle.High r...

Rotatable LED Down Light, beam angle adjustable 10-60°

Beam angle adjustable 10-60 degree.Shell can rotate 360°,vertical 0-40°.High power CREE LED,even and uniform light output,Die casting aluminum alloy housing,good heat sinking.Widely used ...

LED Panel Light

Designed to replace T8 fluorescent tube or Phillip Grille light.Epistar 3528/3014 SMD LED.Aluminum alloy body.Even and Soft light beam.Various mounting means.50,000 hours lifetime.Environ...






  • List View


LEDs Magazine Newsletter

Our weekly flagship news source

Product Focus

Monthly newsletter

Illumination in Focus

Bi-monthly newsletter

Copyright © 2007-2014. PennWell Corporation, Tulsa, OK. All Rights Reserved.