DeRun Lighting offers multifunction, four-channel RGBW LED controller

DeRun Lighting's RGBW 4 channel LED controller is a multifunction controller, mainly used to control 4 channel lamps. It supports switching the mode from RGBW to RGB+W; at the same time, under each large mode, it supports switch mode from 39 kinds of smaller modes. This controller can control RGB and RGBW lamps, users no need to purchase a variety of controller, then can achieve the effect you want, also RGBW mode can realize pure white light effect that RGB lamps and lanterns can't reach.

Remote control instruction:
This remote have 16 buttons. Unless specified, otherwise, signal light flashes for one time by each clicking. The specific keys function is as follows:
1. on/off key, you could turn on/off controller at any time;
2. Pause key. Under power on state, press the pause button, the controller will maintain the current state, the signal light will always bright, except the on/off key, all other buttons are invalid, until press the pause button again or on/off key to restart the controller to unlock the pause state, the signal light will off;
3. Mode increase key, the mode adds 1 by each pressing;
4. Mode reduce button, the mode minus 1 by each pressing;
5. Brightness increase button, in static mode, brightness series add 1 by each pressing, until up to the brightest, altogether 16 levels;
6. Brightness reduce button, in static mode, brightness series minus 1 by each pressing,until down to the darkest, altogether 16 levels.
7. Speed increase button, in dynamic mode, speed series add 1 by each pressing, until increase to the fastest, altogether 16 levels.
8. Speed reduce button, in dynamic mode, speed series minus 1 by each pressing, until reduce to the slowest, altogether 16 levels.
9. White light increase button, in RGB+W mode, brightness series of white light will add 1;
by each pressing, until add to the brightest, altogether 16 levels;
10. White light reduce button, in RGB+W mode, brightness series of white light will minus;
1 by each pressing, until reduce to the darkest, altogether 16 levels;
11. RGBW mode key, press this key, controller will be in the RGBW mode, in this mode, the fourth channel white light will instead of the white light of the RGB tricolor composite;
12. RGB+W mode key, press this key, controller will be in the RGB+W mode, in this mode, the fourth channel white light and three channel RGB are
independent, white light will be always on, and also you can adjust brightness separately;
13. Scene 1: you could save the current scene by long pressing the button, the green signal light will flash for six times quickly when save the scene
successfully. Each button can save a scene respectively in RGBW and RGB+W mode;
14. Scene 2: you could save the current scene by long pressing the button, the green signal light will flash for six times quickly when save the scene successfully. Each button can save a scene respectively in RGBW and RGB+W mode;
15. Scene 3: you could save the current scene by long pressing the button, the green signal light will flash for six times quickly when save the scene successfully. Each button can save a scene respectively in RGBW and RGB+W mode;
16. Scene 4: you could save the current scene by long pressing the button, the green signal light will flash for six times quickly when save the scene successfully. Each button can save a scene respectively in RGBW and RGB+W mode.

Contact:

Amy -- DeRun Lighting technology Co., Ltd.
+86-755-3330-4059
More in Networks & Controls