Upshine offers surface-mounted, sensor-driven LED ceiling light with emergency backup

Upshine's surface mounted LED ceiling light uses a high lumen SMD LED, fire-rated PC diffuser with even light output. Wth its IP54 waterproof structural design, the LED ceiling light is an ideal replacement traditional lighting in damp locations. The LED driver is a top branded component with triac dimmable function, and the light features a 120° wide beam angle.

- Up to 70% energy saving compared to standard CFL
- Long lifetime of 40,000 hours
- Dimmable when using triac dimmer
- 120° wide beam angle
- CCT: 3000K 4000K 5000K 5700K
- No UV/IR light
- Environmentally friendly, without mercury or any other hazardous substances

Daylight & Microwave Sensor
Detection area:
- 140 degree wide detective beam angle with 5~7 meters distance.
Operation
- With sufficient natural light, when illuminance is more than 10 lux, the light does not switch on when presence detected.
- With insufficient natural light:
1. When illuminance is less than 10 lux, the light switches on automatically when presence detected.
2. With presence detected, light will never switch off, even the nature light is sufficient.
3. After presence left, any movement detected within time-delay (30 seconds), the light will continuously work for another hold time (30 seconds), then switch off automatically until next movement detected.
4. Hold time: 30 seconds

Emergency
Smart IC control, self-test starts after the luminary is connected to mains for continued 24 hours.
1. Emergency function switches automatically between power cut and power restoration.
2. Li battery, high efficiency
3. Battery duration: 3 hours @4W
4. Charge period: 24 hours

Application areas
The LED ceiling light is applicable for corridor, basement, garage, warehouse, monitoring, and other places of energy-saving indoor and outdoor lighting.

Contact:

UPSHINE Lighting
More in Company Newsfeed