Dialight unveils LED L-866/L-885 catenary strobe for canyon, river and valley cable-crossing applications

Date Announced: 26 Oct 2010

Farmingdale, NJ— Dialight, the global leader in LED lighting technology, today unveiled its latest innovation in LED obstruction lighting with the launch of its new Vigilant™ Series L-866/L-885 LED Dual Catenary Strobe, the first-ever LED white/red obstruction beacon designed to warn aircraft of power line and cable crossings above canyons, valleys and waterways.

This first-of-its-kind LED product to meet the L-866/L-885 spec is virtually maintenance-free for up to 10 years for dramatic cost savings, improved safety, reduced liability risk and positive ROI compared to the typical Xenon flashtubes commonly used in this application.

“Once again, Dialight has emerged as the innovation leader in the obstruction business with this remarkably longer life unit that not only slashes maintenance costs, but also reduces utility operators’ liability against accidents and compliance violations,” said Roy Burton, Dialight’s Group Chief Executive.

Typically, the support structures on either side of a span require five beacons per tower. Operating at the required 60 flashes per minute, Xenon flashtubes usually last no longer than eight months. At an average replacement cost of $550 per tube, plus tower-climb labor costs and the risk of worker injury during changeout, Xenon tube maintenance can be extremely costly.

In addition to its long life, the Vigilant L-866/L-885 is the most energy-efficient catenary strobe on the market, consuming just 120 watts per unit to produce 20,000 candela (cd) on white for daytime operation, and just 20 watts for 2,000 cd on white nighttime operation. Red nighttime operation draws just 45 watts to deliver 2,000 cd.

Ideal for use in naturalized areas where light pollution is a concern, the Vigilant L-866/L-885 leverages Dialight’s precision optics to delivering optimum visibility at altitude for small planes and helicopters, with minimal light scatter above and below.

At just 28 pounds, the low-profile, lightweight unit also reduces wind resistance and makes for easier, safer installation compared to larger, much heavier Xenon units. Further owing to its enhanced safety features, the Vigilant system operates on a low-voltage power supply and control box that can be placed at the base of the tower, eliminating the need to work with and in close proximity to high-voltage wiring and transmission lines.

The system is compatible with multi-unit synchronization from any single GPS controller. Each unit is backed by Dialight’s industry exclusive 5-year warranty for added peace of mind and operational reliability.

For more information about the Dialight Vigilant Series L-866/L-885 LED Dual Catenary Strobe or any other innovative Dialight LED fixture for obstruction lighting, visit www.dialight.com.

About Dialight
Dialight (LSE: DIA.L) defines the current state of LED lighting technology with continuous innovations in light output, efficacy and reliability for their complete line of high-specification lighting fixtures specifically designed for industrial, commercial, hazardous location, transportation & infrastructure applications. These results are directly related to the company’s ongoing commitment to advancing solid-state lighting products that vastly reduce maintenance, improve safety, ease disposal, and are more environmentally friendly – thereby helping to reduce CO2 emissions, the dominant GHG contributor to global warming. The company is headquartered in the UK with operations in the USA, UK, Denmark, Germany and Mexico.

Contact
Richard Krueger (609)750-9113

E-mail:rkrueger@sspr.com

Web Site:www.dialight.com

More in Company Newsfeed