Good Measurement Report for ATG Electronics iBright™ T8s issued by OliNo Renewable Energy

Content Dam Leds En Ugc 2009 05 Good Measurement Report For Atg Electronics Ibright T8s Issued By Olino Renewable Energy Leftcolumn Article Thumbnailimage File
18603 0 thumb Date Announced: 06 May 2009

According to OliNo’s measurement report, power factor of iBright™ T8s remains high, between 0.93 and 1.0 when the voltage is varied over the entire range of values from 100 - 250 V.

This test result demonstrates that ATG Electronics iBright™ T8s is more energy-efficient than ordinary LED Fluorescent Lights on the markets.

Features:
-Highest Reliability
iBright™ T8s are the stablest LED fluorescent light, as
1) they are made of CREE chip SMD LEDs, with low light decrease and good heat dissipation;
2) they are using specially designed aluminum housing with good heat dissipation, and have no heat buildup inside;
3) they are using external constant current power supplies; and
4) they are using specially designed loop circuit, one LED fail won’t make the whole fluorescent light fail.

-Higher Efficacy
iBright™ T8s EPS are using original CREE chip SMD LEDs, of high efficacy (typical 90lm/w).
-Higher Efficiency
Power factor of iBright™ T8s remains high, between 0.93 and 1.0 when the voltage is varied over the entire range of values from 100 - 250 VAC.

Recommended Applications
-General illumination for homes, offices, restaurants, hotels, malls, buses, trains, warehouses, parking lots etc;
-Task lighting for cabinets, cupboards etc in your homes, restaurants, and kitchens or any other places where accent lighting is required.
-Retail display lighting for the articles in your stores and shops;
-Back lighting for square billboards or advertisement boards.

Contact
ATG Electronics Corp. International Sales Department Tel: +86-21-33932667 Fax: +86-21-33932677

E-mail:sales@atgelectronics.com

Web Site:www.atgelectronics.com

More in Company Newsfeed