LEDs Magazine Reed ExhibitionsPennWell
   HOME   NEWSARTICLESPRODUCTSBUYERS GUIDEJOBSEVENTSWEBCASTSSTRATEGIES
VIDEOMAGAZINENEWSLETTERSTECHNOLOGYAPPLICATIONSRESOURCESDIRECTORYADVERTISECONTACT US
Technology and Applications of LEDs
Subscribe
Products
Case Studies
Press Releases
Add Announcement
Make your
Product Featured
Information in this section is provided directly by manufacturers and distributors.
 PRESS RELEASES
< Previous  Next >  Index

Maxim universal HB-LED drivers cover wide input-voltage range

Date Announced: 15 Feb 2006

SUNNYVALE, CA- Maxim Integrated Products (NASDAQ: MXIM) introduces the MAX16801/MAX16802 high-brightness (HB) LED drivers with a wide input-voltage range.

The MAX16801 is well suited for universal AC input (rectified 85V to 265VAC) LED drivers, while the MAX16802 is intended for DC-input-voltage LED drivers (10.8V to 24VDC or higher with external bias).

The MAX16801/MAX16802 have a 262kHz fixed switching frequency and current-mode control. An external MOSFET provides high-power (over 50W) and high-efficiency (over 85%) operation, and allows for small size components which reduces system cost.

Strings of HB LEDs can be driven with a wide (0 to 100%) dimming range by using PWM or linear dimming control. When the LED current requires tight regulation, designers can use the additional on-board error amplifier with a 1% accurate reference.

These devices are ideal for buck, boost, SEPIC, and isolated or nonisolated flyback topologies in general lighting applications, decorative and architectural lighting, display backlighting, and other constant current-source LED applications.

Both devices feature an ultra-low 45 microamp startup current, allowing the use of high-value startup resistors and low-value startup capacitors. LED driver startup is fast, while dissipation is substantially reduced. An input voltage undervoltage lockout (UVLO) allows setting of the input start voltage with an external resistor-divider. Pulling the UVLO pin low shuts down the devices.

The MAX16801/MAX16802 include digital soft-start, which results in superior control of the output current rise during startup. This eliminates virtually all output current overshoots. Both devices include thermal shutdown and are available with a 50% or 75% maximum duty cycle.

Rated for operation over the extended temperature range (-40 degrees Celsius to +85 degrees Celsius), the MAX16801/MAX16802 are available in a surface-mount, lead-free, 8-pin microMAX(R) package. Prices start at $0.63 (1000-up, FOB USA).

** microMAX is a registered trademark of Maxim Integrated Products, Inc.

Contact
Customer Service
1-800-998-8800

E-mail: Brian_Hedayati@maximhq.com

Web Site: www.maxim-ic.com/ledmag

Webcast March 30
Copyright © 2007-2010 PennWell Corporation, Tulsa, OK. All Rights Reserved. LEDs Magazine is part of PennWell's Technology Group, which also includes:
Designed by Kestrel Web Services