| For high brightness LED technology to succeed in replacing standard incandescent bulbs for high volume markets, the cost of the drive electronics required to power the LEDs must be kept to a minimum. This article, the fourth in a series discussing LED ballast design, presents a solution that exploits a novel constant power flyback converter architecture. This approach provides an ultra low cost 7W offline LED ballast that will run from 85–265Vac at 50/60Hz.
Traditionally, a mains-derived, isolated, constant current ballast suitable for driving LEDs is achieved using a flyback converter operating under closed loop control (Fig. 1a). The actual LED current is measured using a sense resistor and is used to control the duty cycle of the primary side switching element. Although this gives excellent LED current regulation, the feedback circuitry requires an optocoupler, shunt reference, and sense resistor, all of which add cost and reduce overall efficiency.
+++++++
This article was published in the April 2008 issue of LEDs Magazine.
To read the full version of this article, please visit our Magazine page, where you can download FREE electronic PDF versions of all issues of LEDs Magazine.
You can also request a print copy of LEDs Magazine (available by paid subscription) and sign up for our free weekly email newsletter.
Links:
|
