View This Issue - March 2012

LED lighting market to grow while LED component market goes flat (MAGAZINE)

+++++

This article was published in the March 2012 issue of LEDs Magazine.

View the Table of Contents and download the PDF file of the complete March 2012 issue, or view the E-zine version in your browser.

+++++

Ella Shum, director of LED research of Strategies Unlimited based in Mountain View, CA, kicked off this year's Strategies in Light (SIL) conference with her LED market forecast as the opener of the HB-LED Market track. Shum said she expects revenues from packaged LEDs to be relatively flat in the coming years as good growth in LED lighting is offset by decreasing revenues in other applications. The market for LED components (i.e. packaged LEDs) in the lighting market grew 44% from $1.2 billion in 2010 to $1.8 billion in 2011.

Ella Shum of Strategies Unlimited discusses the LED market at SIL.
Ella Shum at SIL
Shum tracks the packaged LED market, which does not include LED chips or end products. The worldwide packaged LED market grew nearly 10% from $11.3 billion in 2010 to $12.5 billion in 2011. Fig. 1 shows the packaged LED market by application segment.

Strategies Unlimited also tracks the solid-state lighting (SSL) industry. Vrinda Bhandarkar, director of research for LED lighting at Strategies Unlimited and conference co-chair, provided a review and forecast of the LED lighting industry at SIL – see below.

FIG . 1. Revenue from packaged LEDs by application in 2011.
FIG . 1.
Shum, also an SIL conference co-chair, stated that the most significant change in the LED market in 2011 was the price drop in LED components. The average cool-white 1W LED package fell in price from $13 per kilolumen to $6/klm in one year. Shum stated that in general the number of LEDs required for a given application is dropping, and prices are dropping even faster. Price reductions, combined with an oversupply of low- and medium-power LEDs (predominantly used in backlighting), has put pressure on revenue growth, while unit growth continues to rise.

The upside to such price decreases is more rapid adoption of LEDs in lighting, mobile, automotive, signage, and backlighting segments. As will be discussed, LED lighting revenues more than tripled in three years.

Top performers

The top ten manufacturers accounted for 68% of all LED component sales in 2011 but 75% of total sales in 2010. In 2011, the top three LED manufacturers each had revenues exceeding $1 billion. The companies in the top ten were the same in 2011 as 2010 but the order was slightly different (Table 1).

Packaged LED makers in Japan accounted for the greatest portion of overall LED component revenues (30%) followed by Korea (26%) and then Taiwan and Southeast Asia (19%).

LED growth by segment

Mobile applications including mobile phones, notebooks, tablets and portable DVD players, made up the largest LED segment at $3.4 billion. In the mobile phone market, OLEDs are beginning to supplant LED-backlit LCD displays (Fig. 2). However, the reduced market for LEDs in mobile phones is compensated by growing demand in tablets. Shum said the two products that matter the most in terms of tablet volume are the iPad2, which uses 36 LEDs, and the Kindle Fire, which uses 20 LEDs. A higher-resolution iPad3, which has yet to be introduced, is expected to use 80 or more LEDs.

The LED revenue for TV and monitor backlights was $3 billion in 2011, but is projected to drop substantially by 2016. “At the one end, manufacturers continue to pursue high-end edge-lit displays, such as the 85-inch display from Sharp,” said Shum. However, demand for lower-cost televisions in developing regions has caused manufacturers to develop a lower-cost direct-backlighting scheme, which results in thicker panels (so-called chubby TVs). These use fewer LEDs compared with slim edge-lit designs. The resulting display cost is 5-10% higher than displays using CCFLs, compared with a 20-30% premium for the thinner edge-lit designs.

FIG . 2. The LED-backlit mobile phone market is expected to flatten while OLED displays take off.
FIG . 2.
The lighting segment of the packaged LED market experienced the greatest upside in 2011, growing 44% to $1.8 billion. Shum said she expects LED lighting to continue to take a greater proportion of the LED pie in the coming years.

LED signs and channel letters came in at a market size of $1.4 billion in 2011. This market has the greatest demand and supply from China. According to Shum, 87% of all LED signs are manufactured in China today and she expects this percentage to only increase.

In automotive lighting, Strategies Unlimited is forecasting a 34% compound annual growth rate (CAGR) from 2011 to 2016 for front exterior headlamps. Automakers are also using LED-based interior lighting, including instrument panels using backlighting, and have started introducing LED-backlit decorative panels. OLEDs are being considered as sunroof materials, with some future designs showing OLED windows that also function as solar panels.

LED manufacturers’ response

Shum said that LED manufacturers are reacting to pricing pressures in various ways. Companies are differentiating their products based on the quality of the light produced, including higher CRIs. She also mentioned the inclusion of embedded controls in packages and testing of LED packages at high temperatures. “Luminaire manufacturers may be willing to pay a premium for this testing,” she said.

Due to continued pricing pressure and intense competition, Shum said she expects consolidation and vertical integration to occur as a means to maintain profit margins.

Strategies Unlimited’s forecast for 2012 shows an LED market of $13.3 billion, up 6% over the 2011 level of $12.5 billion (Fig. 3). Essentially flat sales are expected for 2013 and 2014, projected at $13.3 billion and $13.1 billion, respectively.

LED lighting on the rise

The LEDs in Lighting track at SIL commenced with a plenary session in which Vrinda Bhandarkar reported LED Lighting revenue of $9.4 billion in 2011 and projected an industry-wide CAGR of 20% through 2016. In her talk entitled “Global Lighting Transformation,” Bhandarkar opened by stating, “The rate at which we use energy now is unsustainable.” And that energy-conservation theme pervaded the discussion on the uptake of SSL. Bhandarkar made a forecast for the LED lighting market and discussed the factors that could impact acceptance of the technology.

FIG. 4. The $9.4 billion LED lighting market in 2011.
FIG. 4.
She began by stating that last year’s “drastic decline” in the price of LEDs should lead to a faster uptake of SSL.

The LED lighting industry has already experienced tremendous growth. “In just 3 years the market has grown 3.5 times,” said Bhandarkar. LED lighting revenue climbed from $2.7 billion in 2008 to $9.4 billion last year. Bhandarkar said that more LED lighting products are becoming mainstream and that is in part the impetus for the growth rate.

Winning in a down market

Ironically, LED lighting is a growing segment within a declining lighting market. Bhandarkar said, “In 2011, the general lighting market declined in the US and Europe but the global LED lighting market grew by 69%.” Bhandarkar placed LEDs as being only 5-10% of the general lighting market, and that is why SSL was able to experience tremendous growth in a down market. The SSL lighting market almost doubled from $5.5 billion in 2010 to the 2011 level of $9.4 billion.

FIG. 5. Strategies Unlimited projects robust growth for both the LED retrofit lamp and luminaire markets.
FIG. 5.
The presentation included a review of the LED lighting market by application segment (Fig. 4). The commercial and industrial segment showed the highest growth last year, and accounted for 25% of the total market in 2011. Some niches such as portable lighting including flashlights are essentially 100% LED at this point. Retrofit lamps accounted for only 13% of the revenue in 2011 – down percentage-wise from 15% in 2010. But the retrofit numbers are way up in terms of actual revenue due to the overall market growth.

Bhandarkar summed up the state of LED lighting saying, “No one is questioning whether LEDs will be there or not.” The former skeptical view of the technology has largely disappeared and the primary driver for LED uptake is energy efficiency.

The presentation included a few product-specific market statistics. Bhandarkar said the price of LED downlights, retrofit lamps, and street lights dropped 15-20% in 2011. Globally, she said the industry sold 23 million LED recessed downlights. She said that those sales were “not only in the US and Europe but also in Japan and other parts of Asia.”

Different lighting segments and market factors are driving uptake of different SSL product types. Bhandarkar said that the commercial segment has driven adoption of directional LED PAR lamps. Price is far more important for omnidirectional A19 lamps where consumers will ultimately become the driving force and where retailers establishing new low pricing levels will determine deployment. Bhandarkar said, “People could think about a $10 bulb,” implying a threshold at which the typical consumer would consider LED lighting and which was achieved in low-end lamps in 2011.

Efficiency drives LED uptake

There are numerous reasons that LEDs will continue on a growth path, according to Bhandarkar, but most come back to efficiency. She pointed out the widely-debated DOE efficiency guidelines that have taken effect in the US. Moreover, others countries and regions including the UK, Korea, the European Union, Canada, Australia, and others are implementing lamp-efficiency requirements.

In the long term, Bhandarkar projected that LEDs will be the only clearly viable solution to the energy issue. She said many people expect a transition to halogen sources, but that increasingly-stringent guidelines in the US would result in a phase-out of halogen between 2014 and 2016.

Fluorescent technologies including compact fluorescent lamps (CFLs) also have a shaky future. Bhandarkar said that in general fluorescent technology provides a good quantity of light, reasonable efficiency, and in some products acceptable light quality. Still, she noted that low cost has been the driver of all fluorescent lighting usage. And the rare-earth quotas being imposed by China are raising fluorescent pricing.

Bhandarkar also discussed additional characteristics of LEDs that can compound energy savings. She said, “LEDs become the most flexible technology that can use controls easily” and of course controls and dimming increase the potential for savings. Bhandarkar also noted the directionality of LEDs and the ability of lighting design to eliminate wasted light.

LED lighting projections

Bhandarkar said the biggest uncertainty in Strategies Unlimited’s projection is the impact of price declines. She said, “Frankly we do not know how the market will react to price declines.” The projected combined CAGR for all LED lighting products is 20% through 2016.

Bhandarkar said that her projections rely on less-aggressive estimation of price decline relative to data that the DOE has presented. The DOE has used a relative cost index of 100 to represent the cost of an LED lamp or luminaire in 2010. By 2015 the DOE projects a reduction of 80% to a relative index of 20. Bhandarkar expects a more moderate 13-15% decline each year, and that would equate to an index in the range of 38 to 43 by 2015.

Bhandarkar concluded by pointing out that the LED retrofit market will quickly become a commodity market. She said that all factors including rebates and purchase incentives are pushing the segment toward commoditization, low cost, and broad adoption. “If you are going to be in the lamps market, you have to be part of the mass market,” she said.

Bhandarkar sees the luminaire market quite differently, noting that we are just at the stage of having lighting manufacturers install LED sources in legacy form factors. She expects LEDs, as a disruptive technology, to result in new form factors and new ways of thinking about light. Bhandarkar said, “For the first time you have control over quantity of light. You can tweak the quantity of light. And you can control it wherever you want.” Those factors, according to Bhandarkar, provide LEDs with a tremendous advantage over other light sources.

Related articles:
Research projects five years of growth for packaged LEDs and SSL
Packaged LED market resumes moderate growth while the SSL market will enjoy 12% CAGR through 2017
Strategies Unlimited projects 12% CAGR for LED lighting through 2017

 

 

RELATED COMPANIES

Zierick Manufacturing Corp

Offers innovative solutions for interconnect applications. Specializes in wire-to-board and board-to-board applications. Provides surface mount and thru-hole products while further reduci...

Cree Inc

Leads the LED industry in performance, brightness and reliability with its XLamp LED family, enabling the lighting industry with efficient, environmentally-friendly LEDs that produce beau...

InnoLight sp zoo

EU located lighting manufacturer for LED GU10 5W 600lm CRI>80 reflector, great performance, and LED E27 5W 380lm classic traditional appearance.

Energy Efficient Lighting

Energy Efficient Lighting offers total solutions to both conventional and more advanced LED lighting fixtures and LED retrofit kits for commercial and industrial applications.

Schréder

48 companies worldwide, passionate about light and innovation, experts in developing LED lighting solutions for safe and comfortable environments with significant energy and cost savings,...

Guardian Industries

Guardian Industries Corp. is a leader in float glass, fabricated glass and high performance coated glass products. Guardian lighting solutions deliver optimal performance, flexibility and...

ELMA Electronic Inc

Provides standard and customized LED solutions. Elma's LED family offers consistent, reliable, and durable illuminating and indicating solutions.

LEDSAmerica Inc

LedsAmerica is a full line LED line company and has manufacturing in Iowa where T8 LED-O tubes and street lights are made together with PL, PARs, High Bay lights. MAx

Lumentra Inc

Provides NVLAP accredited optical (photometry, colorimetry, Lumen maintenance), thermal (mapping and transient analysis), electrical characterization services, product development, supply...

CINCON USA

The LED, DC-DC and AC-DC power supplies from 1W - 1600W. Cincon’s lighting controllers, interfaces and devices incorporating DALI protocol. LED drivers from 25W - 150W with international ...

LTF LLC

LTF, LLC is a U.S based solid-state lighting product development and manufacturing company with facilities located in both USA and China.

Marian Inc

Marian is a global company who supplies die cut and converted parts to the LED market. Materials include thermal pads, reflective, venting, gaskets, insulators, diffusers and more.

Colorimetry Research

Specializes in the field of optics, manufacturing, electronics and software enables us engineer products with the right balance of hardware and software.

eldoLED America Inc

Designs and manufactures drive solutions for LED based lighting systems. Our technologies empower our customers to deliver the promise of LED lighting.

Cirrus Logic Inc

Cirrus Logic develops high-precision, analog and mixed-signal integrated circuits for a broad range of innovative customers across a variety of energy-related applications, including the ...

LEDSupply

Established in 2002 as an ecommerce store for all your LED product needs.

CINCON

Designer and manufacturer of custom and industry standard LED, DC-DC and AC-DC power supplies from 1W to 1600W. Cincon also designs and manufacturers lighting controllers, interfaces...

Illumination Machines

Illumination Machines designs custom optics, heat sinks, and remote phosphor systems for LED luminaires and lamps.

eldoLED BV

eldoLED is a world leader in the design and manufacture of intelligent drive solutions for LED based lighting systems. Our technologies empower our customers to deliver the promise of LED...

CSA Group

A global solutions provider of product testing and certification services for electrical, mechanical, plumbing, gas, medical and a variety of other products.

RELATED PRODUCTS

Cree LED Modules

Cree LED modules deliver beautiful, consistent light, backed by a 5-year warranty. They offer a choice of dimming options, while reducing the lighting power load by 80%.

Cree XLamp® XP-L LEDs-the industry’s highest efficacy single-die LED.

Cree® XP-L LED is the first commercially available single-die LED to achieve up to 200LPW at 350mA. The XP-L enables 50% or more performance increase as a drop-in upgrade.

Surface Mount Wire Gripper - Part Number 1301

The Zierick 1301 is designed to allow customers to easier terminate a stripped wire to a PCB. Wire sizes to 24 AWG. Terminal is UL Recognized.

Surface Mount Wire Gripper - Part Number 1262

The Zierick 1262 is designed to allow customers to easier terminate a stripped wire to a PCB. Wire sizes from 0.025" to 0.095". Terminal is UL Recognized.

Unlock new LED lighting solutions with Cree High Density LEDs

Cree® High Density LEDs deliver the industry’s highest optical control factor enabling lighting manufacturers to improve performance, cost and size of LED lighting—enabling never before p...

Cree CXA LED Array Family

Cree’s CXA LED Arrays are optimized to simplify design and lower system cost, delivering high lumen output and efficacy with a family of single, easy-to-use arrays.

Cree XLamp® XM-L2 EasyWhite® LED

The first 5mmx5mm LED to enable color-consistent 50W halogen performance; the XM-L2 EasyWhite delivers 1,100 lumens and is optimized to replace halogen technology.

Surface Mount Insulation Piercing Terminals

Surface Mount Wire-to-Board terminals available for wire gauges ranging from 24 to 14 AWG. Parts can be terminated to allow daisy-chain applications. Eliminates difficulty with direct...

LED flexible strip and aluminum LED bar

Full range of LED strip and bar including the unique high lumen strip. Protection degree up to IP68.Epistar 3528/5050 SMD LED.Compliant with CE & RoHS.2-year warranty.3528: 60LED/m,120LED...

P3 Indoor Full Color LED Display Video screen

High-density pixel pitch,high resolution,high refresh rate,magnificent and high-definition image and video effect.P3,P5,P6,P7.62 to P10 available.Epistar SMD LED,wide viewing angle.High r...

LED Panel Light

Designed to replace T8 fluorescent tube or Phillip Grille light.Epistar 3528/3014 SMD LED.Aluminum alloy body.Even and Soft light beam.Various mounting means.50,000 hours lifetime.Environ...

Rotatable LED Down Light, beam angle adjustable 10-60°

Beam angle adjustable 10-60 degree.Shell can rotate 360°,vertical 0-40°.High power CREE LED,even and uniform light output,Die casting aluminum alloy housing,good heat sinking.Widely used ...

Solar LED Paver Light

100% solor powered.No wires, no electricians.Super capacitors instead of battery,maintenance-free.Absorb sunlight in daytime and illuminate 8-12 hours during night. Epistar LED.Activation...

T8 LED tube light

Epistar Super bright 3528/2835 SMD LED.Aluminum alloy body with plastic cover.Consist with traditional fluorescent tubes.Easy mounting.PF>0.90,CRI>72,Over 60% energy-saving,Low degradatio...

LED light Bulb – LED spotlight

The AR111,GU10,MR16,PAR30,PAR38 LED bulbs are ideal replacement of 10-75W halogen or CFL bulbs.Cree/Everlight LEDs.PMMA lens.Aluminum housing.Good heat dissipation.Surface temperature les...

Super bright Injection LED modules

Housed by ABS material,covered by epoxy resin on surface with good insulation.Beautiful appearance.Waterproof.Anti-fire.Super bright 5050/3528 LED.12V voltage.Ideal light source for backl...

Flexible LED screen - Rental and Stage LED billboard

Special design,flexible use,light weight,super slim,transparent,SMD technology,easy to install.Can realize any curved and creative installation horizontally and vertically.IP65 protection...

iVAR COB LED Downlight

iVAR COB LED Downlight use die-casting magnesium alloy to make the main body,has Excellent heat dissipation performance,and Unique and delicate looking design.

LIMS - Liquid Injection Molding System

Silicone LIMS can be used to injection mold silicone components such as lenses or gaskets in an automated process. The two-component, thermoset material ranges in Shore A hardness from 5-80.

360 degree 10W led bulb

360 degree 10W led bulb has high efficiency, high power factor,environmental friendly, unique heat-dissipating design and perfect thermal management.

TOPIC INDEX

CONNECT WITH US

                

SOCIAL ACTIVITY

UPCOMING EVENTS

  • List View

NEWSLETTERS

LEDs Magazine Newsletter

Our weekly flagship news source
SUBSCRIBE

Product Focus

Monthly newsletter
SUBSCRIBE

Illumination in Focus

Bi-monthly newsletter
SUBSCRIBE

  •  
  •  
  •  
Copyright © 2007-2014. PennWell Corporation, Tulsa, OK. All Rights Reserved.