LEDnovation introduces 75W- and 100W-equivalent A-lamps, warm-on-dim BR30

LEDnovation, a manufacturer of LED replacement lamps based in Tampa, FL, has introduced 75W and 100W comparable versions of its EnhanceLite Omnidirectional A-lamps. The LEDH-A19-75-1-27D-IO and LEDH-A19-100-1-27D-IO offer 1150 lm and 1600 lm output and require 13.7W and 19W, respectively, and deliver a warm color temperature of 2700K. The company has also introduced the EnhanceLite LED BR30 lamp for retail lighting, which features a CRI of 93 and light output of 680 lm at 2700K color temperature.

The 75W-equivalent A lamp from LEDnovation features A19 form factor and 1150 lm output at 13.7W.
75W and 100W-equivalent A lamps

A lamps are suited for a variety of applications including table lamps, wall sconces, hanging pendants, ceiling lamps and other fixtures. The company will begin producing the 75W-equivalent lamp in November 2012 and the 100W-equivalent lamp in January 2013.

Describing the new lamp, Israel J. Morejon, CEO of LEDnovation, that the 75W-equivalent lamps meets the requirements for the ANSI A19 form factor at 4.4 in (113.3 mm) tall and 2.3 in (60 mm) in diameter, while the 100W-equivalent lamp meets the requirements of an ANSI A21 form factor at 5.25-in (133.3 mm) tall and 2.625 in (66.6 mm) in diameter. He said, “LEDnovation has found the point where beauty in design meets form following function. The flow of the sleek fins up the side of the dome effectively cools the lamp and provides a profile that simply makes sense. Staying very close in shape to a traditional incandescent lends an air of familiarity to the LEDnovation Omni. LEDnovation A lamps utilize a diffusing dome very close to spherical shape that results in bright, pleasant warm light that is distributed evenly over the entire white orb. In addition, the 75W weighs 3.8 ounces [108 g] which makes it the lightest in the industry.”

In May of this year, GE Lighting announced a 100W-equivalent LED lamp that consumes 27W and produces a warm white with a color temperature of 3000K. This lamp conforms to the ANSI A21 form factor but will not ship until the first half of 2013. Philips has stated that it will begin shipping its 100W equivalent A-lamp with ANSI A21 form factor in the 4th quarter of 2012. That lamp produces 1700 lm and uses 23W of power at a color temperature of 2700K. Both Philips and GE have announced the lamps will carry a rated life of 25,000 hours.

The LEDnovation lamps will have a rated life of 50,000 hr and have a 5-yr warranty. Other specifications include a CRI>90, R9>90, power factor exceeding 0.90 and dimming to 5% on most dimmers.

Morejon continued, “Many times over our customers come back enthralled by the result of their energy savings. These savings are significant and stem not only from LED lighting but also a corollary reduction in the HVAC impacts due to the LEDnovation lighting retrofit. This results in a strong ROI that improves the bottom line.”

Warm-on-dim BR30 LED lamps

The Warm Dimming LED BR30 replacement lamp mimics the behavior of incandescent and halogen lamps when dimmed. EnhanceLite LED-BR30-65-1-27D-IF utilizes digital dimming control, a trichromatic color solution and customized dimming profile algorithms to follow the blackbody Planckian locus with exceptional fidelity when dimming.

The lamps suit applications that require warm lighting such as track lighting, recessed ceiling lights, retail display lighting, and general household light fixtures. Targeted to restaurants, hotels, retail and residences, the EnhanceLite LED BR30 becomes proportionally warmer in color temperature as the lumen output is lowered. The EnhanceLite LED BR30 lamps will be produced in late October 2012.

The EnhanceLite LED BR30 lamp has a high CRI of 93 coupled with 2700K warm white color temperature at full power of 8.5W. The BR30 lamp has an output of 680 lm and an efficacy of 80 lm/W. It fits the standard ANSI form factor.

Morejon commented, “Our new EnhanceLite LED BR30 was born of our restaurant customers desires for warm dimming solutions. This allows our restaurateur customers to offer the same hospitable ambience while gaining the advantage in energy and environmental savings from employing LEDnovation technology.”

With more than 25 times the lifetime of an equivalent incandescent BR30 lamp, LEDnovation’s energy efficient EnhanceLite LED BR30 reduces the frequency of replacement, a critical attribute for reducing maintenance costs. The lamp comes with a 5-year warranty and 50,000-hr rated life.


Zierick Manufacturing Corp

Offers innovative solutions for interconnect applications. Specializes in wire-to-board and board-to-board applications. Provides surface mount and thru-hole products while further reduci...

Cree Inc

Leads the LED industry in performance, brightness and reliability with its XLamp LED family, enabling the lighting industry with efficient, environmentally-friendly LEDs that produce beau...

InnoLight sp zoo

EU located lighting manufacturer for LED GU10 5W 600lm CRI>80 reflector, great performance, and LED E27 5W 380lm classic traditional appearance.

CSA Group

A global solutions provider of product testing and certification services for electrical, mechanical, plumbing, gas, medical and a variety of other products.

Energy Efficient Lighting

Energy Efficient Lighting offers total solutions to both conventional and more advanced LED lighting fixtures and LED retrofit kits for commercial and industrial applications.


48 companies worldwide, passionate about light and innovation, experts in developing LED lighting solutions for safe and comfortable environments with significant energy and cost savings,...

Guardian Industries

Guardian Industries Corp. is a leader in float glass, fabricated glass and high performance coated glass products. Guardian lighting solutions deliver optimal performance, flexibility and...

ELMA Electronic Inc

Provides standard and customized LED solutions. Elma's LED family offers consistent, reliable, and durable illuminating and indicating solutions.

LEDSAmerica Inc

LedsAmerica is a full line LED line company and has manufacturing in Iowa where T8 LED-O tubes and street lights are made together with PL, PARs, High Bay lights. MAx

Lumentra Inc

Provides NVLAP accredited optical (photometry, colorimetry, Lumen maintenance), thermal (mapping and transient analysis), electrical characterization services, product development, supply...


The LED, DC-DC and AC-DC power supplies from 1W - 1600W. Cincon’s lighting controllers, interfaces and devices incorporating DALI protocol. LED drivers from 25W - 150W with international ...


LTF, LLC is a U.S based solid-state lighting product development and manufacturing company with facilities located in both USA and China.

Marian Inc

Marian is a global company who supplies die cut and converted parts to the LED market. Materials include thermal pads, reflective, venting, gaskets, insulators, diffusers and more.

Colorimetry Research

Specializes in the field of optics, manufacturing, electronics and software enables us engineer products with the right balance of hardware and software.

eldoLED America Inc

Designs and manufactures drive solutions for LED based lighting systems. Our technologies empower our customers to deliver the promise of LED lighting.

Cirrus Logic Inc

Cirrus Logic develops high-precision, analog and mixed-signal integrated circuits for a broad range of innovative customers across a variety of energy-related applications, including the ...


Established in 2002 as an ecommerce store for all your LED product needs.


Designer and manufacturer of custom and industry standard LED, DC-DC and AC-DC power supplies from 1W to 1600W. Cincon also designs and manufacturers lighting controllers, interfaces...

Illumination Machines

Illumination Machines designs custom optics, heat sinks, and remote phosphor systems for LED luminaires and lamps.

eldoLED BV

eldoLED is a world leader in the design and manufacture of intelligent drive solutions for LED based lighting systems. Our technologies empower our customers to deliver the promise of LED...

Cree CXA LED Array Family

Cree’s CXA LED Arrays are optimized to simplify design and lower system cost, delivering high lumen output and efficacy with a family of single, easy-to-use arrays.

Cree LED Modules

Cree LED modules deliver beautiful, consistent light, backed by a 5-year warranty. They offer a choice of dimming options, while reducing the lighting power load by 80%.

Cree XLamp® XP-L LEDs-the industry’s highest efficacy single-die LED.

Cree® XP-L LED is the first commercially available single-die LED to achieve up to 200LPW at 350mA. The XP-L enables 50% or more performance increase as a drop-in upgrade.

Surface Mount Wire Gripper - Part Number 1301

The Zierick 1301 is designed to allow customers to easier terminate a stripped wire to a PCB. Wire sizes to 24 AWG. Terminal is UL Recognized.

Surface Mount Wire Gripper - Part Number 1262

The Zierick 1262 is designed to allow customers to easier terminate a stripped wire to a PCB. Wire sizes from 0.025" to 0.095". Terminal is UL Recognized.

Unlock new LED lighting solutions with Cree High Density LEDs

Cree® High Density LEDs deliver the industry’s highest optical control factor enabling lighting manufacturers to improve performance, cost and size of LED lighting—enabling never before p...

Cree XLamp® XM-L2 EasyWhite® LED

The first 5mmx5mm LED to enable color-consistent 50W halogen performance; the XM-L2 EasyWhite delivers 1,100 lumens and is optimized to replace halogen technology.

Surface Mount Insulation Piercing Terminals

Surface Mount Wire-to-Board terminals available for wire gauges ranging from 24 to 14 AWG. Parts can be terminated to allow daisy-chain applications. Eliminates difficulty with direct...

LED flexible strip and aluminum LED bar

Full range of LED strip and bar including the unique high lumen strip. Protection degree up to IP68.Epistar 3528/5050 SMD LED.Compliant with CE & RoHS.2-year warranty.3528: 60LED/m,120LED...

P3 Indoor Full Color LED Display Video screen

High-density pixel pitch,high resolution,high refresh rate,magnificent and high-definition image and video effect.P3,P5,P6,P7.62 to P10 available.Epistar SMD LED,wide viewing angle.High r...

LED Panel Light

Designed to replace T8 fluorescent tube or Phillip Grille light.Epistar 3528/3014 SMD LED.Aluminum alloy body.Even and Soft light beam.Various mounting means.50,000 hours lifetime.Environ...

Rotatable LED Down Light, beam angle adjustable 10-60°

Beam angle adjustable 10-60 degree.Shell can rotate 360°,vertical 0-40°.High power CREE LED,even and uniform light output,Die casting aluminum alloy housing,good heat sinking.Widely used ...

Solar LED Paver Light

100% solor powered.No wires, no electricians.Super capacitors instead of battery,maintenance-free.Absorb sunlight in daytime and illuminate 8-12 hours during night. Epistar LED.Activation...

T8 LED tube light

Epistar Super bright 3528/2835 SMD LED.Aluminum alloy body with plastic cover.Consist with traditional fluorescent tubes.Easy mounting.PF>0.90,CRI>72,Over 60% energy-saving,Low degradatio...

LED light Bulb – LED spotlight

The AR111,GU10,MR16,PAR30,PAR38 LED bulbs are ideal replacement of 10-75W halogen or CFL bulbs.Cree/Everlight LEDs.PMMA lens.Aluminum housing.Good heat dissipation.Surface temperature les...

Super bright Injection LED modules

Housed by ABS material,covered by epoxy resin on surface with good insulation.Beautiful appearance.Waterproof.Anti-fire.Super bright 5050/3528 LED.12V voltage.Ideal light source for backl...

Flexible LED screen - Rental and Stage LED billboard

Special design,flexible use,light weight,super slim,transparent,SMD technology,easy to install.Can realize any curved and creative installation horizontally and vertically.IP65 protection...

iVAR COB LED Downlight

iVAR COB LED Downlight use die-casting magnesium alloy to make the main body,has Excellent heat dissipation performance,and Unique and delicate looking design.

LIMS - Liquid Injection Molding System

Silicone LIMS can be used to injection mold silicone components such as lenses or gaskets in an automated process. The two-component, thermoset material ranges in Shore A hardness from 5-80.

360 degree 10W led bulb

360 degree 10W led bulb has high efficiency, high power factor,environmental friendly, unique heat-dissipating design and perfect thermal management.







Have a press release or other announcement you'd like to share?

Submit Announcement

Miss a webcast? Watch it in the archives


LEDs Magazine Newsletter

Our weekly flagship news source

Product Focus

Monthly newsletter

Illumination in Focus

Bi-monthly newsletter

Copyright © 2007-2014. PennWell Corporation, Tulsa, OK. All Rights Reserved.