DOE releases new LED retrofit lamp test results at SIL

Based on work conducted at the Pacific Northwest National Laboratory (PNNL), the US Department of Energy (DOE) is readying a report on another round of LED retrofit lamp tests including A19, G25, MR16, PAR20, and PAR30 products. Over the 14 months since the prior round of solid-state lighting (SSL) retrofit testing, PNNL reported that the mean cost in terms of dollar per kilo-lumen dropped from $130/klm to $63/klm.

PNNL lighting engineer Michael Royer presented the results as part of the LEDs in Lighting track at the Strategies in Light (SIL) conference in Santa Clara, CA. The DOE will post details of the testing in a report due in a few weeks. The testing included 38 lamps from 18 manufacturers that were bought anonymously by PNNL personnel from 9 retailers (summarized in nearby table).

DOE releases new LED retrofit lamp test results at SIL

The PNNL bought and tested three samples of each lamp. The lab performed LM-79 photometric testing using an integrating sphere. The lab did not test the samples with a goniophotometer. The lab bought the lamps last summer and performed the testing during the fall of 2011.

Efficacy rising but range is wide

Royer begin the presentation of results reporting that both the minimum and maximum efficacy in tested lamps continues to rise, but that the range in efficacy is still broad. In this round of testing lamps ranged from 36 lm/W to 72 lm/W with a mean of 53 lm/W. The DOE has consistently found such wide ranges in efficacy in its varied SSL testing programs and Royer said the range is getting wider. He attributed the range to the different product types and application requirements that lamp manufacturers are pursuing.

Royer discussed cost versus efficacy across the products tested noting that the mean was $0.69/lm/W in the prior round of testing dropping to $0.49/lm/W in the new round. Generally, he said, consumers are getting more "bang for the buck."

A19 lamps deliver consistent efficacy

Moving to specific lamp types, the latest tests include evaluation of 11 A19 lamps. Royer said those lamps were grouped rather closely in terms of efficacy with the mean at 60 lm/W. Lamps that dissipate less than 10W were in the 50-55 lm/W range with those dissipating more than 10W in the 55-70 lm/W range. The prior round of testing had a much broader spread with some lamps below 20 lm/W.

The latest round of testing marked the first time the DOE had evaluated G25 lamps. Royer said the LED G25s performed "better than halogen but not quite as well as CFL based on what was on store shelves." That comment referred to efficacy that ranged from 35-55 lm/W.

The MR16 and PAR20 LED lamps provided a significant efficacy advantage over incumbent lamps. In the case of PAR30 lamps, the 8 LED lamps tested were evenly spread above and below the benchmark CFL efficacy in the 50-55 lm/W area.

Royer said that the PNNL tests did not cover all of the criteria in Energy Star testing. But he noted than in the areas that PNNL covered, "A vast majority of the products are meeting the Energy Star criteria." He said that many meet requirements such as efficacy even though they haven't been qualified to Energy Star. In total 23 of the 38 met the portions of Energy Star requirements that were evaluated by PNNL.

CCT and CRI

The lamps tested ranged broadly in CCT from 2500K more than 6000K. But Royer noted that most of the products were in the 2700-3000K range similar to incandescent and other incumbent sources.

Color rendering varied significantly across the entire test range. Royer said, "The lower cost products are the ones that aren't performing quite as well in color rendition." Some lamps fell below 70. But he noted a general improvement over prior tests with many lamps in the 80 CRI range.

The PNNL color rendering tests also included the R9 red sample that isn't used in the composite CRI score. Royer said that LED lamps are "a little better than CFL on this front."

Royer also discussed the trends in terms of lamp manufacturers participating in programs such as Energy Star and the DOE's Lighting Facts Label. In the prior testing 6% of the lamps were qualified to Energy Star and in the latest round 15% were qualified. The percentage of lamps carrying the Lighting Facts Label went from 29% to 61%.

Size, shape, and conclusions

There are still some issues with size and shape according to Royer. In the case of the A19 lamps, 6 of 11 were longer than the ANSI specification. In the PAR20 set, 2 of 5 were too long, and in the PAR30 sample 4 of 9 were too long. Obviously the length matters in some applications and not in others.

Summarizing the testing, Royer said, "We are definitely getting more for our money these days in terms of lumen output." That may seem like good news, but it isn't always so according to Royer. He said gains in LED chip efficacy are in many cases resulting in too much light output. That can lead to glare or simply too much light for an application. He said that the trend is lamps that hit the low wattage goals but are brighter than the equivalent incumbent source targeted by the manufacturer.

Royer also noted that lower lumen retrofit lamps are "disappearing for some unknown reason." He said that the majority of manufacturers seem to be focused on high-lumen lamps. Royer noted that apartments and small rooms need less lighting output, but that buyers can have a hard time finding lamps in levels such as 400 lm.

RELATED COMPANIES

Zierick Manufacturing Corp

Offers innovative solutions for interconnect applications. Specializes in wire-to-board and board-to-board applications. Provides surface mount and thru-hole products while further reduci...

Cree Inc

Leads the LED industry in performance, brightness and reliability with its XLamp LED family, enabling the lighting industry with efficient, environmentally-friendly LEDs that produce beau...

InnoLight sp zoo

EU located lighting manufacturer for LED GU10 5W 600lm CRI>80 reflector, great performance, and LED E27 5W 380lm classic traditional appearance.

CSA Group

A global solutions provider of product testing and certification services for electrical, mechanical, plumbing, gas, medical and a variety of other products.

Energy Efficient Lighting

Energy Efficient Lighting offers total solutions to both conventional and more advanced LED lighting fixtures and LED retrofit kits for commercial and industrial applications.

Schréder

48 companies worldwide, passionate about light and innovation, experts in developing LED lighting solutions for safe and comfortable environments with significant energy and cost savings,...

Guardian Industries

Guardian Industries Corp. is a leader in float glass, fabricated glass and high performance coated glass products. Guardian lighting solutions deliver optimal performance, flexibility and...

ELMA Electronic Inc

Provides standard and customized LED solutions. Elma's LED family offers consistent, reliable, and durable illuminating and indicating solutions.

LEDSAmerica Inc

LedsAmerica is a full line LED line company and has manufacturing in Iowa where T8 LED-O tubes and street lights are made together with PL, PARs, High Bay lights. MAx

Lumentra Inc

Provides NVLAP accredited optical (photometry, colorimetry, Lumen maintenance), thermal (mapping and transient analysis), electrical characterization services, product development, supply...

CINCON USA

The LED, DC-DC and AC-DC power supplies from 1W - 1600W. Cincon’s lighting controllers, interfaces and devices incorporating DALI protocol. LED drivers from 25W - 150W with international ...

LTF LLC

LTF, LLC is a U.S based solid-state lighting product development and manufacturing company with facilities located in both USA and China.

Marian Inc

Marian is a global company who supplies die cut and converted parts to the LED market. Materials include thermal pads, reflective, venting, gaskets, insulators, diffusers and more.

Colorimetry Research

Specializes in the field of optics, manufacturing, electronics and software enables us engineer products with the right balance of hardware and software.

eldoLED America Inc

Designs and manufactures drive solutions for LED based lighting systems. Our technologies empower our customers to deliver the promise of LED lighting.

Cirrus Logic Inc

Cirrus Logic develops high-precision, analog and mixed-signal integrated circuits for a broad range of innovative customers across a variety of energy-related applications, including the ...

LEDSupply

Established in 2002 as an ecommerce store for all your LED product needs.

CINCON

Designer and manufacturer of custom and industry standard LED, DC-DC and AC-DC power supplies from 1W to 1600W. Cincon also designs and manufacturers lighting controllers, interfaces...

Illumination Machines

Illumination Machines designs custom optics, heat sinks, and remote phosphor systems for LED luminaires and lamps.

eldoLED BV

eldoLED is a world leader in the design and manufacture of intelligent drive solutions for LED based lighting systems. Our technologies empower our customers to deliver the promise of LED...

RELATED PRODUCTS

Cree CXA LED Array Family

Cree’s CXA LED Arrays are optimized to simplify design and lower system cost, delivering high lumen output and efficacy with a family of single, easy-to-use arrays.

Cree LED Modules

Cree LED modules deliver beautiful, consistent light, backed by a 5-year warranty. They offer a choice of dimming options, while reducing the lighting power load by 80%.

Cree XLamp® XP-L LEDs-the industry’s highest efficacy single-die LED.

Cree® XP-L LED is the first commercially available single-die LED to achieve up to 200LPW at 350mA. The XP-L enables 50% or more performance increase as a drop-in upgrade.

Surface Mount Wire Gripper - Part Number 1301

The Zierick 1301 is designed to allow customers to easier terminate a stripped wire to a PCB. Wire sizes to 24 AWG. Terminal is UL Recognized.

Surface Mount Wire Gripper - Part Number 1262

The Zierick 1262 is designed to allow customers to easier terminate a stripped wire to a PCB. Wire sizes from 0.025" to 0.095". Terminal is UL Recognized.

Unlock new LED lighting solutions with Cree High Density LEDs

Cree® High Density LEDs deliver the industry’s highest optical control factor enabling lighting manufacturers to improve performance, cost and size of LED lighting—enabling never before p...

Cree XLamp® XM-L2 EasyWhite® LED

The first 5mmx5mm LED to enable color-consistent 50W halogen performance; the XM-L2 EasyWhite delivers 1,100 lumens and is optimized to replace halogen technology.

Surface Mount Insulation Piercing Terminals

Surface Mount Wire-to-Board terminals available for wire gauges ranging from 24 to 14 AWG. Parts can be terminated to allow daisy-chain applications. Eliminates difficulty with direct...

LED flexible strip and aluminum LED bar

Full range of LED strip and bar including the unique high lumen strip. Protection degree up to IP68.Epistar 3528/5050 SMD LED.Compliant with CE & RoHS.2-year warranty.3528: 60LED/m,120LED...

P3 Indoor Full Color LED Display Video screen

High-density pixel pitch,high resolution,high refresh rate,magnificent and high-definition image and video effect.P3,P5,P6,P7.62 to P10 available.Epistar SMD LED,wide viewing angle.High r...

LED Panel Light

Designed to replace T8 fluorescent tube or Phillip Grille light.Epistar 3528/3014 SMD LED.Aluminum alloy body.Even and Soft light beam.Various mounting means.50,000 hours lifetime.Environ...

Rotatable LED Down Light, beam angle adjustable 10-60°

Beam angle adjustable 10-60 degree.Shell can rotate 360°,vertical 0-40°.High power CREE LED,even and uniform light output,Die casting aluminum alloy housing,good heat sinking.Widely used ...

Solar LED Paver Light

100% solor powered.No wires, no electricians.Super capacitors instead of battery,maintenance-free.Absorb sunlight in daytime and illuminate 8-12 hours during night. Epistar LED.Activation...

T8 LED tube light

Epistar Super bright 3528/2835 SMD LED.Aluminum alloy body with plastic cover.Consist with traditional fluorescent tubes.Easy mounting.PF>0.90,CRI>72,Over 60% energy-saving,Low degradatio...

LED light Bulb – LED spotlight

The AR111,GU10,MR16,PAR30,PAR38 LED bulbs are ideal replacement of 10-75W halogen or CFL bulbs.Cree/Everlight LEDs.PMMA lens.Aluminum housing.Good heat dissipation.Surface temperature les...

Super bright Injection LED modules

Housed by ABS material,covered by epoxy resin on surface with good insulation.Beautiful appearance.Waterproof.Anti-fire.Super bright 5050/3528 LED.12V voltage.Ideal light source for backl...

Flexible LED screen - Rental and Stage LED billboard

Special design,flexible use,light weight,super slim,transparent,SMD technology,easy to install.Can realize any curved and creative installation horizontally and vertically.IP65 protection...

iVAR COB LED Downlight

iVAR COB LED Downlight use die-casting magnesium alloy to make the main body,has Excellent heat dissipation performance,and Unique and delicate looking design.

LIMS - Liquid Injection Molding System

Silicone LIMS can be used to injection mold silicone components such as lenses or gaskets in an automated process. The two-component, thermoset material ranges in Shore A hardness from 5-80.

360 degree 10W led bulb

360 degree 10W led bulb has high efficiency, high power factor,environmental friendly, unique heat-dissipating design and perfect thermal management.

TOPIC INDEX

CONNECT WITH US

                

SOCIAL ACTIVITY

UPCOMING EVENTS

  • List View

Miss a webcast? Watch it in the archives

NEWSLETTERS

LEDs Magazine Newsletter

Our weekly flagship news source
SUBSCRIBE

Product Focus

Monthly newsletter
SUBSCRIBE

Illumination in Focus

Bi-monthly newsletter
SUBSCRIBE

  •  
  •  
  •  
Copyright © 2007-2014. PennWell Corporation, Tulsa, OK. All Rights Reserved.