The Climate Group requests proposals for outdoor LED lighting trial in London (UPDATE)

The Climate Group’s global LightSavers LED lighting program is seeking interest from LED luminaire manufacturers in submitting proposals for a trial of LED luminaires along roads in London.

UPDATE: The deadline for submission of the Letter of Intent is now midnight November 1, 2010 (GMT).

LightSavers is the first independent global trial that seeks to evaluate how LED luminaires and smart controls perform over time in real-world applications in large cities.

A Letter of Intent can be submitted using an online questionnaire - no formal paperwork is required to respond to the Notice.

Led by The Climate Group, LightSavers is looking to undertake LED streetlight trials in London on the major arterial roads. These roads facilitate the flow of mixed commercial and private traffic into and through the city, and typically require mounting heights for lighting of 10m or 12m.

This is the third trial following two similar trials which are currently being mobilised and for which suppliers have already been selected. Due to the success of the first invitation of expressions of interest of products it has been decided to invite further expressions of interest in order to derive best value and enhance the effectiveness of the trials.

While the specific location for this third trial has yet to be finalized, for the purposes of this Notice of Intent, one of the first two trial sites will serve as the reference for manufacturers’ consideration. Detailed specifications of the proposed trial site can be downloaded from The Climate Group’s website.

LED Safari

An international delegation from The Climate Group’s global LightSavers program organized by Phil Jessup, Director of The Climate Group Lighting Program, attended the IES Street and Area Lighting Conference (SALC) in Huntington Beach, CA on September 26-29.

Cities represented include Adelaide, Melbourne and Sydney, Australia; Hong Kong and Tianjin, China; Kolkata and New Delhi, India; Manila and Quezon City, the Philippines; London, UK; New York City, USA and Toronto, Canada.

Their visit, entitled “LED Safari,” entailed attendance at the LED Specification and Design Fundamentals course, a day of specially arranged municipal and technical presentations, a full day of IES SALC programming and an event “LED ... Listen, Educate, Demonstrate & Be SMART!” The latter was a matching and “speed-dating” event with 18 pre-arranged initial meetings covering LED street lighting, emerging technology and adaptive controls exhibitor manufacturers.

The next day included subsequent follow-up meetings with the requested “dates” or “matches.” At this event, the “London Calling!” was announced. One of the delegates present was Philip Thress from the United Kingdom, representing the project about to be launched in the City of London.

Delegates also attended the first annual meeting of the Municipal Solid-State Street Lighting Consortium and were treated to “City Lights” LED street lighting tours in Los Angeles and San Jose, as well as a visit to the Philips Lumileds facility in San Jose.

RELATED COMPANIES

Zierick Manufacturing Corp

Offers innovative solutions for interconnect applications. Specializes in wire-to-board and board-to-board applications. Provides surface mount and thru-hole products while further reduci...

Cree Inc

Leads the LED industry in performance, brightness and reliability with its XLamp LED family, enabling the lighting industry with efficient, environmentally-friendly LEDs that produce beau...

InnoLight sp zoo

EU located lighting manufacturer for LED GU10 5W 600lm CRI>80 reflector, great performance, and LED E27 5W 380lm classic traditional appearance.

CSA Group

A global solutions provider of product testing and certification services for electrical, mechanical, plumbing, gas, medical and a variety of other products.

Energy Efficient Lighting

Energy Efficient Lighting offers total solutions to both conventional and more advanced LED lighting fixtures and LED retrofit kits for commercial and industrial applications.

Schréder

48 companies worldwide, passionate about light and innovation, experts in developing LED lighting solutions for safe and comfortable environments with significant energy and cost savings,...

Guardian Industries

Guardian Industries Corp. is a leader in float glass, fabricated glass and high performance coated glass products. Guardian lighting solutions deliver optimal performance, flexibility and...

ELMA Electronic Inc

Provides standard and customized LED solutions. Elma's LED family offers consistent, reliable, and durable illuminating and indicating solutions.

LEDSAmerica Inc

LedsAmerica is a full line LED line company and has manufacturing in Iowa where T8 LED-O tubes and street lights are made together with PL, PARs, High Bay lights. MAx

Lumentra Inc

Provides NVLAP accredited optical (photometry, colorimetry, Lumen maintenance), thermal (mapping and transient analysis), electrical characterization services, product development, supply...

CINCON USA

The LED, DC-DC and AC-DC power supplies from 1W - 1600W. Cincon’s lighting controllers, interfaces and devices incorporating DALI protocol. LED drivers from 25W - 150W with international ...

LTF LLC

LTF, LLC is a U.S based solid-state lighting product development and manufacturing company with facilities located in both USA and China.

Marian Inc

Marian is a global company who supplies die cut and converted parts to the LED market. Materials include thermal pads, reflective, venting, gaskets, insulators, diffusers and more.

Colorimetry Research

Specializes in the field of optics, manufacturing, electronics and software enables us engineer products with the right balance of hardware and software.

eldoLED America Inc

Designs and manufactures drive solutions for LED based lighting systems. Our technologies empower our customers to deliver the promise of LED lighting.

Cirrus Logic Inc

Cirrus Logic develops high-precision, analog and mixed-signal integrated circuits for a broad range of innovative customers across a variety of energy-related applications, including the ...

LEDSupply

Established in 2002 as an ecommerce store for all your LED product needs.

CINCON

Designer and manufacturer of custom and industry standard LED, DC-DC and AC-DC power supplies from 1W to 1600W. Cincon also designs and manufacturers lighting controllers, interfaces...

Illumination Machines

Illumination Machines designs custom optics, heat sinks, and remote phosphor systems for LED luminaires and lamps.

eldoLED BV

eldoLED is a world leader in the design and manufacture of intelligent drive solutions for LED based lighting systems. Our technologies empower our customers to deliver the promise of LED...

RELATED PRODUCTS

Cree CXA LED Array Family

Cree’s CXA LED Arrays are optimized to simplify design and lower system cost, delivering high lumen output and efficacy with a family of single, easy-to-use arrays.

Cree LED Modules

Cree LED modules deliver beautiful, consistent light, backed by a 5-year warranty. They offer a choice of dimming options, while reducing the lighting power load by 80%.

Cree XLamp® XP-L LEDs-the industry’s highest efficacy single-die LED.

Cree® XP-L LED is the first commercially available single-die LED to achieve up to 200LPW at 350mA. The XP-L enables 50% or more performance increase as a drop-in upgrade.

Surface Mount Wire Gripper - Part Number 1301

The Zierick 1301 is designed to allow customers to easier terminate a stripped wire to a PCB. Wire sizes to 24 AWG. Terminal is UL Recognized.

Surface Mount Wire Gripper - Part Number 1262

The Zierick 1262 is designed to allow customers to easier terminate a stripped wire to a PCB. Wire sizes from 0.025" to 0.095". Terminal is UL Recognized.

Unlock new LED lighting solutions with Cree High Density LEDs

Cree® High Density LEDs deliver the industry’s highest optical control factor enabling lighting manufacturers to improve performance, cost and size of LED lighting—enabling never before p...

Cree XLamp® XM-L2 EasyWhite® LED

The first 5mmx5mm LED to enable color-consistent 50W halogen performance; the XM-L2 EasyWhite delivers 1,100 lumens and is optimized to replace halogen technology.

Surface Mount Insulation Piercing Terminals

Surface Mount Wire-to-Board terminals available for wire gauges ranging from 24 to 14 AWG. Parts can be terminated to allow daisy-chain applications. Eliminates difficulty with direct...

LED flexible strip and aluminum LED bar

Full range of LED strip and bar including the unique high lumen strip. Protection degree up to IP68.Epistar 3528/5050 SMD LED.Compliant with CE & RoHS.2-year warranty.3528: 60LED/m,120LED...

P3 Indoor Full Color LED Display Video screen

High-density pixel pitch,high resolution,high refresh rate,magnificent and high-definition image and video effect.P3,P5,P6,P7.62 to P10 available.Epistar SMD LED,wide viewing angle.High r...

LED Panel Light

Designed to replace T8 fluorescent tube or Phillip Grille light.Epistar 3528/3014 SMD LED.Aluminum alloy body.Even and Soft light beam.Various mounting means.50,000 hours lifetime.Environ...

Rotatable LED Down Light, beam angle adjustable 10-60°

Beam angle adjustable 10-60 degree.Shell can rotate 360°,vertical 0-40°.High power CREE LED,even and uniform light output,Die casting aluminum alloy housing,good heat sinking.Widely used ...

Solar LED Paver Light

100% solor powered.No wires, no electricians.Super capacitors instead of battery,maintenance-free.Absorb sunlight in daytime and illuminate 8-12 hours during night. Epistar LED.Activation...

T8 LED tube light

Epistar Super bright 3528/2835 SMD LED.Aluminum alloy body with plastic cover.Consist with traditional fluorescent tubes.Easy mounting.PF>0.90,CRI>72,Over 60% energy-saving,Low degradatio...

LED light Bulb – LED spotlight

The AR111,GU10,MR16,PAR30,PAR38 LED bulbs are ideal replacement of 10-75W halogen or CFL bulbs.Cree/Everlight LEDs.PMMA lens.Aluminum housing.Good heat dissipation.Surface temperature les...

Super bright Injection LED modules

Housed by ABS material,covered by epoxy resin on surface with good insulation.Beautiful appearance.Waterproof.Anti-fire.Super bright 5050/3528 LED.12V voltage.Ideal light source for backl...

Flexible LED screen - Rental and Stage LED billboard

Special design,flexible use,light weight,super slim,transparent,SMD technology,easy to install.Can realize any curved and creative installation horizontally and vertically.IP65 protection...

iVAR COB LED Downlight

iVAR COB LED Downlight use die-casting magnesium alloy to make the main body,has Excellent heat dissipation performance,and Unique and delicate looking design.

LIMS - Liquid Injection Molding System

Silicone LIMS can be used to injection mold silicone components such as lenses or gaskets in an automated process. The two-component, thermoset material ranges in Shore A hardness from 5-80.

360 degree 10W led bulb

360 degree 10W led bulb has high efficiency, high power factor,environmental friendly, unique heat-dissipating design and perfect thermal management.

TOPIC INDEX

CONNECT WITH US

                

SOCIAL ACTIVITY

UPCOMING EVENTS

  • List View

NEWSLETTERS

LEDs Magazine Newsletter

Our weekly flagship news source
SUBSCRIBE

Product Focus

Monthly newsletter
SUBSCRIBE

Illumination in Focus

Bi-monthly newsletter
SUBSCRIBE

  •  
  •  
  •  
Copyright © 2007-2014. PennWell Corporation, Tulsa, OK. All Rights Reserved.